What is the easiest way to make a ton of 135° bends on 3/4 emt?Fucking every conduit bender stops at 90°
>>2794889triple nickel bender
>>2794889turn the bender around and make a bunch of 45° bends instead
>>2794889You'd have to fab something up yourself and make sure you have the appropriate bending radius or else you'll kink the pipe. The reason they don't go over 90 is because 90 is the maximum bend you can have by code in a run of conduit.I hope you're not planning on running wires through it.
>>2794889You need a bender. Or fill it with sand and torch it (if you don't care about the coating) and try to bend it.
>>2794889stick a 70 and 65 together retard
Might tryMuratic acid