ITT 1/12 scale accessories.Post what toys you've bought or made for your toys recently. Just had the set of gamer chairs arrive myself.
>>9383629I have those chair in my order in transit
>>9383629Fellow gamer.Just using the SEGA figmaPlus set, and the junk computer that came with Rikka's nendoroid. It scales up decent enough I think.
Mind I dump some pics showcasing the Super Foodie Series stuff I got a little while ago?
>>9384934Go for it
Old pic... made some "bricks" out of erasers. Lol
>>9384987hawkeye's done with those roastiesi like how you use an iphone as a tv. what's playing in the pics?
>>9384991>what's that playing?Either clips from DREDD 2012 or this SCP short film https://youtu.be/EOxarwd3eTs
>>9385025and one more close up version of my initial shot.
Anybody get this thing? How's the quality?
LittleArmory Vectors are back up. Grab a set before they’re gone again.I’ve already got 5 in my cart.
this setup took way too long, mostly messing with miles because the fishing pole weighs more than him
>>9387361Holy hell thats a comfy spiderman
>>9387444trips confirm that he is indeed comfy
>>9385025That sponge is surprisingly effective a cushion/ottoman thing.
>>9386695Stiff, sturdy, solid.I really enjoy posing him because he looks so natural. I really wished he'd come with more hands though. He only has closed fists and a grasping hands. I might have to steal some from another figure.He also comes with black shoes and a half shin if you wanted him to wear boots from something like Mezcos.And for only $30~$40, pretty damn good.I have a second figure on the way because my first one got stained. Some shitty Chinese leather clothes's black coloring leeched into the plastic that was impossible to clean until I was literally started scraping chunks of the plastic away.There seems to be quite a bit of clothes cropping up using the body as the base lately. Even some of GPSlot's new listings uses him.
i should do a new version of this setup soon
>>9387361>my wifes son
>>9390201Based and comfy, if only I had room I could try replicating something similar, like a meet-out in some hangar or some shit. Btw what is that Spider-Car that fits the Figuarts so well?
>>9390221thanks man, i like what i created, even though i think it's time to mix up the display a littlethe car is actually holding mafex spider-men, some SHF might be too big to fit. it's a disney toybox spider-mobile, and the car is awesome. grappling hook and tow cable in the back, chromed pipes, trunk space, room for two (and you can fudge someone sitting in the back as well). it also has huge wheels, lights and sounds, i would've loved this as a kid.
>>9390243they also made a bike
>>9390244A Disney toy should have no right be Akira inspired and looking that good, though yeah I doubt any of my Kamen Riders can ride them properly.
>>9390254actually, just to see if it'd work, i put ex-aid in the cycle and he fits perfectly fine. i remember endgame captain america being able to ride it tooit's more the car because the steering wheel and short footwell prevents taller figures from using it
>>9390265Oh sweet, that's good to hear then. Maybe I should pick up one, need more sci-fi looking vehicles than just plain dirt bikes.
malefik spawn dual wielding ARsnot 1/12 tho i think mcfarlane is 1/10
>>9394155LA hand an pistol sets delayed to November. Tori Factory posted some images from the instructions for their Mk 19.
>>9394214Damn. is this related to the recent chinese power outages? Didn't really think that Tomytec would get affected too. Also where can I find Tori Factory news? And did any of you guys receive your Muratas yet? Mine's not due for about a month.
>>9394332I was waiting for the hands to get in-stock before ordering the Murata set, but I may need to go ahead. LA has been largely unaffected the last couple of years, but it was bound to happen. Plafactory_tori on twitter for the latest from Tori.
>>9394356best preorder those hands man, they go really fast, especially cause they have a "rare" itemthe torifactory site also updated with some really nice stuff. If any anons couldn't find the flintlock japanese rifles from the last thread these might be a decent substitute, i'll have to see the Murata first to see how they constructed it before I buy into it though.
>>9394367https://torifactory.com/?product_cat=gun-series forgot link
>>9390244I need that spidey bike! How can I find it?
>>9396229https://toywiz.com/disney-marvel-toybox-spider-man-spider-ham-exclusive-action-figure-vehicle-with-bike/Link is completely informational. I in no way endorse ToyWiz.
>>9396229>>9390244it's neat because you can change what side the sidecar is on, but then there are two compatible plugs right on top of the handlebars. i wonder what kind of compatibility function they were planning
Didn't know they were doing an accessory pack for the 19, but there it bet
>>9398984This stuff is resin right?
>>9399084Yeah, 3D printed.
I put together the LA L85 kit. It's an iconic gun and looks great but of the LA kits I've done so far I think it was one of the less fun builds.
>>9404247Oooh lemme guess, too many small parts? Or is one of those sandwich builds that require three parts but the middle part also composed of four different parts that you had to build beforehand? Did you have to use a bunch glue as well?
>>9404251It's definitely not as bad as some of the ones with tiny tiny iron sight pieces that will never stay on without glue or such. But there are some annoyances. The butt does require a kind of 3 part sandwich and means you can't paint it modularly. The other parts actually kind of feel overdesigned. Like it's designed to have the barrel/handguard be swappable and the scope/carrying handle be swappable and swapping the scope/carrying handle also requires swapping the front sight, so it's a bunch of extra complexity and potential lost/broken parts that I don't really think is necessary. The scope has a kind of sliding lock mechanism which is kind of loose and I can imagine some people might get ones with worse tolerance that are looser. There's a part that slides through both parts of the hand guard too and my first attempt at sliding in just made it snap in half. Luckily it had a tiny bit of connection left and I was able to get it all the way through in the end.It's not like I hate the kit, but I won't be buying any extras to paint differently. I'll get the L86 when they release it though.
>>9404295I get the modular design thing they’re going for, but it would REALLY help if they told us which parts to glue beforehand so I don’t accidentally seal shit and I know what parts are swappable. Also they have these extra “collectible” parts that are meant to be used for other completely different gun and they never tell you what it’s for so I have a whole separate cabinet of extra LA shit
>>9394332>And did any of you guys receive your Muratas yet?Pics from twitter 1/2. They look good with figures, though I do not believe those are factory slings.
>>9390244that's the akira bike with spidey logos on it
>>9383629>>9384463how those chairs treating you? i had a set of 4 and all but one broke and i had to fix them. all broke in the same place, where the central column of the wheels and legs meet the rest of the chair. I'd recommend you put some silicon in that socket so the friction doesn't shear it off when you move it
>>9407954>>9407972Thanks for the tip
Little armory's m134 minigun is a bitch to pose but otherwise looks great with my exorcistHaven't tried it out with some 6 inch figures I have but it may seem to scale well with em>tfw still got 2 more guns to build
>>9408991Are the straps good enough to hold that backpack onto place or do you have to use the peg? I want to give some of my Kamen Riders the minigun but obviously they have no hole on the back.
Anyone have the re-ment bar? I would like to see how it scales before taking it out of the box and assembling it.
I saw this bone throne and instantly thought it was good fit for a god of death
>>9409292>Are the straps good enough to hold that backpack onto place or do you have to use the peg?I'd say so it's very light, the straps are made of a rubber material and with threading method provided in the assembly book its adjustable. My octane fig doesn't have a hole in the back just some peg for mounting a gun and it's pretty sturdy. Depending on the figure, this octane for example was more trouble than it's worth to remove the shoulder joint, you may need to remove the strap from one side and use a pair of tweezers to retread the strap and to tighten it in placeGonna need to buy some shooting effects
>>9410695Yeah, that came with Marvel Select Mephisto and was an amazing accessory to have.
>>9409812What's the best place to get these rement sets? They look awesome
>>9410946Sweet, I'm going to pick up some then.
>>9411167I got mine at HobbyLinkJapan.
>>9405715>>9405720i completely forgot these are resin kits, i've literally never built one, how much different is it besides the super glue?
>>9414860alright, i'm trying to fucking build one of the kits i ordered and honestly, this is amateurish as hell, the barrel doesn't line up with the body at all, i had to basically shave off the pegs and super glue it to body, and don't even get me started on the super glue. christ, this is nowhere near the polish i was used to with LA kits
It’s done. Wouldn’t recommend this kit at all. Like I said above, it wasn’t aligned properly, the pointy part where the bullets come out end up not fitting as a result so I had to shave off the barrel, one of them broke off too, you can see it on the left most gun. Parts are generally just really fragile too with the super glue, it fell out of the figma’s hands and bam, the tiny sling hook was gone. I would also recommend being careful when shaving off the barrel cause my snapped in several pieces, had to glue them up. the sling construction is fucking retarded, I’m not doing that shit, it’s literally too small and it just flings off your hand when you’re not looking. And lastly, FUCK superglue like honestly, this shit is just stressful to work with.That’s it for my rant/review. I’m probably out of the Tori Factory game after the flintlocks and the pistol extendo gadget, sorry lads, hope you guys get better luck with these, i had that major misalignment issue on both kits and it’s left a sour impression of 3D printed kits for me. The muratas look really good though, just wish it wasn’t so frustrating to build.
>>9415846They probably should have just printed them as one piece that just left some clean up and paint work necessary. The 98K had build options that made a kit make sense, but the Muratas don't.
>>9415991idk how much different plastic molding and 3d printing are but they should've made actual round barrels for this, resin is hella fucking fragile enough as it is, and i don't think it's a good fit for peg insertion type shit, they should look into the sandwich type builds that LA does, those are sturdier
anything else like this? just a bunch of themed 1/12 accessories in a pack
>>9420590I need more 1:12 furniture. And by "more" I mean any.
>>9420667you should get some! they're useful.i have a bunch of different types and they all add to display possibilities
Shiet this Grenade Launcher looks great. I need to find a way for this to be carried around like a handheld minigun.
>>9423516i saw this and stuff like the corner shoot pistol. has tori factory done anything before? do we know their quality?
>>94243553D resin/plastic combinations. They're a bit fiddly, and not as clean a product as Little Armory. You're mostly buying for the subject matter.
>>9383629anyone have any on-hand pics of this scaling right beside figures?promo pics are the only thing my smooth brain could find on this thingthanks
>>9426451I may have the case of turbo retardationthanks for spoonfeeding my dumb ass
Well, I found this. It's 1/10 though. But may work with 1/12 well, I guess.
>>9426845mo worriesjust wish they had 1/12 sleeping bags, my figs need to be comfy
So, who bit the bullet?The hunting riffle and micro-uzi with attachments and cases. Green cases look fine, but the gunmetal ones will come in handy for some dioramas of mine.
Does anyone know if there's more to this series?I bought 2 grey ones but it doesn't have enough base parts to connect more walls horizontally or parts to make a platform on the wall.
>>9433836unfortunately no, they were really terribly designed in that theres no real way to combine them other than vertically
>>9433158i didn't i have enough guns and cases from littlearmory. they should do more off the wall stuff like the camping set
Anyone know of a good 1/12 scale deagle?
>>9432913what's the figure on the right?
>>9434721homura (figma 115) comes with one, but figma accessories can be slightly smaller than 1/12there's also this set, but i have no experience with it.
>>9432913Were can I get the mini fig?
>>9434792"Frame Arms Girl Hand Scale Innocentia"
>>9434858>Don't talk to me or my daughter ever again.jpg
>>9434721One of the LA Resident Evil sets that either just came out or is coming out soon as 2 deagles in it. I'm kind of sad because I want them but it's overpriced for 2 pistols and I don't need any more M4s so I didn't order it.
>>9434781Sousai Shoujou Teien Ritsuka Saiki from Kotobukiya
are there a 3d printable 1/12 Accessories?
>>9433158With littlearmory, stuff like this is kind of redundant and being a bit pricey doesn't help. I want them to make stuff that hasn't been done.
Any recommendations for inexpensive 1:12 furniture? I'm seeing single chairs for friggin $50.
>>9435798Well, it isn't a fucking model kit, thus these crates and cases are way more sturdy. Plus the weapons are larger than LA, and more sturdy as well. Plus they have cases of their own.Win-win for me.
>>9434858Does the small one scales well with their governator line?
>>9436724They're exactly the same size.
>>9435848I just ordered these todayhttps://www.amiami.com/eng/detail/?gcode=FIG-IPN-4241I also looked at thesehttps://www.amiami.com/eng/detail/?gcode=TOY-SCL2-29093https://www.amiami.com/eng/detail/?gcode=FIG-IPN-3838Anyone knows where to look for 1/12 spears/bo-staff/a fucking broomstick? The only decent stuff I found was custom on Ebay, but the shipping is too expensive.
Does anyone here know any 1/12 clothing/accessory stands? I got one of the 1/12 tbleague figures and I'm afraid of displaying the cloak on the figure long term in case it stains, but I still want to hang up the cloak somehow on a stand, because it is pretty nice.
>>9437103Don't mean to be that guy, but couldn't you just get a cheap little dowel rod and trim it down?
>>9437213that's a neat idea. I think I'll give it a try actually
where can I get 1/12 toolbox and tool accessories?
I came here just to post my gamer chair too! These chairs are awesome, so much detail, can’t recommend them enough
>>9439400it's 11 years old ... the only place i seen was ebay but at terrible prices. Sorry anon might be lost unless you want to drop an ungodly sum on it>>9439837is that one orange? i haven't seen that color. be careful anon i had 3/4 ones i had break.>>9407954>>9407972But they are still nice to have
>>9439853Yep it’s in the second set I think. Oh damn how did they break?! I bought a full box and was gonna sell the rest but might hold onto them for insurance now
>>9439857sorry i deleted that one to many typos but if you look here i lay it out>>9407972basically the point where the legs meet the wheels is a bit weak and can twist off easily
>>9439866Oh sorry I probably should have read through more of the thread, yes I see what you mean. Thanks for the heads up, I’m gonna try and reinforce my orange one before it breaks as it’s a really nice item
>>9439875Yeah they are great other than that one fault I have 4 myself
>>9439856>'s 11 years oldholy moly
New LittleArmory stuff, a UGV Equipment Robot System. (Picture is it and a Frame Arms if anyone's wondering)
>>9440360That's pretty much the RAWR from BF4. The battlefield collection grows.
>>9440374This will be perfect for a classified tunnel rat..>>9439837Yall got links for this chairs?
>littlearmory field desk sold out on amiamii want that desk!
>>9440524>Yall got links for this chairs?>https://www.amiami.com/eng/detail/?gcode=GOODS-04130651I'm still waiting to my set to arrive, I'll post pics when they arrive
>>9440360>>9440374this would work perfect with 1000toys robox
>>9441764i ended picking up both the desk and the drone set from a japanese seller on ebay. anyone have them?
These “Micro Toy Box” things showed up at Five Below for $3 each. I picked one up on a whim and I’m going to have to stop myself from buying all of them up. They’re not especially good, but the act of opening up each of the little toys, the sticker-sheet checklist, and the stackable bins are highly addictive.
>>9383629It's a long shot but does anyone know where I could get a 1:12 scale eyepatch? I can't seem to find anything since typically they get sculpted into the head
>>9456473At that scale, wouldn't it be easier just to make an eyepatch?
>>9456517Oh it would be easy, but I don't trust my ability to make one that cools good so if there is already one that exists I can just take from another toy then I'll go for that.If not then I guess oll need to buy some leather.
>>9456473At that scale any actual wearable eyepatch is likely going to look bad. Just slap a little blob of clay onto the figure's eye, and make the strap from thin black tape (you can get this online, I have used it for marking off walls for painting).
>>9456521>cools good*looks good Sorry I'm a retard, as you are probably aware
>>9456522I guess clay and tape is the better option, guess I'll try that since I imagine they'll have that stuff on amazon.The eye patch in question is going on this fella.
>>9456527I happened to be looking for clothes for this guy and came across a FIGlot face mask that you could possibly repurpose into an eye patch.FIGLot 1/12 scale Shield Skull Mask for Mezco One:12 WWE Figures (Figure NOT Included) https://www.amazon.com/dp/B08HFMF8JB/ref=cm_sw_r_apan_glt_fabc_MPC3YXCKBPHF5XM0G25S
Well anyway, this figure body zero guy is pretty great, solid joints, american styled blank body with infinite possibilities if there are heads made. He's holding him under his own strength and balance here.
>>9457843He's actually taller than a classified figured so he's on the upper end of 6 inches.
>>9453796She looks real happy to have those toddler toys
>>9461460She also enjoys making breakfast on her Retronics Toshiba travel stove.
Just got an email about these. it's a random pack of 10 for 60 which is a bit much but it comes to 6 bucks a box. Thinking about preordering them. I would love to have more guitars. how does the f toys guitars scale with figma and figuarts?https://www.bigbadtoystore.com/Product/VariationDetails/186821
>>9465917https://ameblo.jp/871masaki/entry-12236718272.htmlThe amps are the big draw, IMO/
>>9465917>>9466840I hope this wil available in amiami, so it will be cheaper
>>9465917>>9466840would you guys happen to know any other makers for guitars to find specific models?
>>9468180Media Factory did at least 3 waves for the anime release of Beck. Not gonna be cheap these days. Ban Presto did a line of cell phone charms based on Hide's Fernandes MG series guitars. Roughly 1:12, though maybe a tad thick on the body. J.Dream has done gashapon guitars, not entirely certain how well they scale with anything.The F-Toys set posted isn't there first rodeo with 1:12 guitars, so they may have done a specific model in an older set.
>>9465917>big bad scam sitefind a better seller
Put this together for fun. Built a quick wire frame for the tree and wrapped it with aluminum foil then sculpey. After hardening it, covered it in texture paint, laid it onto a base and set to work making an eerie forest display piece.
>>9470228The branches look really weird. Maybe make those a tad thinner. Looks great otherwise.
>>9470233Yeah, it was my first time and there was an issue with breakage and bensing during the baking process so I just thickened it up to salvage the project. Probably had something to do with the metal wire being too soft.
>>9470228You're in the wrong thread, but good job.
>>9471451How so? It's a display accessory for a 1/12 figure
Do the 1/6 scale gasha consoles look well even with 1/12 toys? I adore the small PS1, but I feel like it'll look fuckhueg when I start making dioramas again.
>>9468404> actual scam site is dorksidethey canceled another pre-ordered case months after i ordered it. maybe if they stopped giving everything away to youtubers, they could actually fulfill an order
>>9461666She's very adorable, Satan. You must be proud.
>>9468380thanksfound a couple of the beck ones for a good price. looks like I'll just have to keep my fingers crossed someone makes a jazzmaster some day though
>>9384983kekI dig it
I'm looking to equip my SHF Dangerous Zombie with some over-the-top weaponry. I really want a fat double barreled shotgun and chainsaw, like something straight out of DOOM. I realize Doomguy is getting a figma, but I'm not sure I care enough for his new design to justify the figure as an accessory bundle.I'd love some suggestions!>>9472469The price kinda sucks, but it's honestly a great set asides for the boxes.>consoles and controllers are all perfectly detailed and painted well>comes with paper console boxes for you to cut-out and fold up as well>all the game disks, cartridges, and cases are blank and require stickers>this isn't terrible, but the stickers easily come off the boxes due to their small size and corners I haven't seen a decent replacement for these that's at a notably better price.https://www.amazon.com/Max-Factory-figmaPLUS-Accessory-Multicolor/dp/B08DD1HTQHAnd from what I can tell, the mark-up is about what you'd find on Mandarake anyways.
>>9484741Those are so good, but I agree about the price. Might try to get them later if they're still up. Wish they had cables, but I figure it wouldn't be too hard to get cables for them.Talking more about these, though, from the Takara Tomy collection. They're 1/6, but just look at that detail. Haven't seen many pictures using them, though, besides one from figma general.
What do you guys think?
>>9484899If you're going to christmas theme, you gotta actually do it.>tfw bought bottle brush trees last year intending to do up a christmas tree and make some presents, but then didn't actually do it
>>9484899there was a guy on etsy who makes capes that made some perfectly scaled ones, but he took down the listing last wednesday. so mad I didn't order one
>>9484741>I'd love some suggestions!CThe Fortnite line may be what u want. Hasbro takes over in January, but that shouldn't be an issue.
>>9488815It's somewhat of an issue when Hasblow's deluxe figures come with less accessories than the jazware's basic ones.
>>9488815>that shouldn't be an issue.hasbro fucking sucks compared to jazzwares
Found this while looking for 1/12 accessories. It's from Japan, but the reviews are mixed.
>>9492945That set is 13 bucks on BBTS fyi.
>>9492945Perfect for figmas, it's somewhat delicate but other than that I really like the set.
LittleArmory Field Desk A2 now in Olive colors.
LittleArmory Desk Work Tools A
>>9494164>>9494167Both can be combined so to speak.
L34A1 Sterling with Welrod Mk2 and a red beret.
>>9492945I got 3 sets of these from Hobbylink for ~$7 each. It's a model kit and really neat, but definitely not worth $31.>>9494164>>9494167>>9494178I convinced myself I wouldn't buy guns from littlearmory, but when they do stuff like this, I can't resist.
>>9494814put your trip back on, slt
>>9494167>>9494171love littlearmory, hate how they always mold accessories in gray plastic
>>9495286Easier to paint in whatever colors you like that way.
>>9495286>>9495606this, the whole point is to paint them
>>9494990that would be me Not sure why that guy thinks I posted that though.last thing I posted here was this >>9465917
>>9496205christ, fuck off already
>>9496202>>9495606i'd rather just pay more to have it done. it's a laptop, not a gundam
Anyone know how well one of these things scales with Figuarts? I kinda wanna get one for the SHF Pac-Man.
>>9497326>Not wanting a red laptop that's 3 times faster
>>9494171if these are stickers, great. but if they're printed on cardstock for us to cut and glue ourselves, fuck that
>>9499063According to the pic you posted, the stuff on the right side in the light blue box (ie the desktop screen, MRE) are decals. But the stuff on the left side and in the lower right corner are papercrafts.
>>9499063Stuff on the left is papercraft, the stuff on the blue background are decals, probably waterslides.
F-Toys is making 1/12 scale Katana's and flintlock rifles.
how are these WWE breakable vehicles as actual cars?
>>9468380where can i find this easter island head figure?
>>9502184For cars check out Bruder toys, they also got trucks, vans, jeeps, etc.
old pic, sorta funny.
>>9502184While I can't say from in-hand experience, I have seen pics of the car and the ambulance with your average 1:12 stuff and they seemed to scale pretty well. At worst they may be a bit oversized and I heard they fall apart easily (as per their gimmick) but they did look nice. I been waiting for them to go on sale but they never seem to and I'm hesitant to pay full price for em myself so take that as you will.
I tried 3D printing this Les Paul model. The print fucked up for various reasons, but I got sense of how close my scale estimate was at least. Could probably stand to be a tiny bit bigger relative to a Japanese school girl, but it's a good usable size.
>>9501290These ain't worth the price. Too fragile, paint is poorly applied and is really easy to scratch.
Amazon recommended these to me. What do you guys think?
>>9514141Although they might work, these are generally too big especially for figma. Keep in mind they were meant for 7 inch wrestling figures.
>>9514141Perfect for your own miniature wrestling league
when the little armroy revolver set out baka amiami
Built a bike for my pokemon figmas. Still need to do a few touch ups, but reasonably happy with the result.
>>9518275Is a bike that can stick to walls a thing from the new pokemon games? I never played past diamond and pearl.
>>9519608Well, shit. That's what I get for phoneposting at 5AM after spending three hours gluing tiny brake lines.For now it's, uhh, the mountain bike. Replaces rock climb.
Just got the valaverse guns recently. These are awesome and great price $13
Huh, didn't know LittleArmory made certain gun variants a limited edition run. https://kusakusa.wordpress.com/2020/10/11/little-armory-g36ck/
>>9522712Oh good, I hope BBTS gets them in soon. Been waiting on these for a good minute. Thanks for the update anon
>>9522712I preordered both the alpha and bravo sets for my figmas. I know they're going to be bigger than littlearmory, but some of the scaling seems off especially the AK and MP5. Those look too big compare to the rest of the guns.
I'm trying to round up some little things that could fill out a 1:12 toy shelf. I'm specifically wanting something that could represent kaiju vinyls, and I've seen little cheap capsule toys like these in pictures but can't find anywhere to buy them. Anyone come across anything that could work or have any other ideas?
Anyone got an STL for cloud's buster sword? the one's i've found are all divided into several pieces, figured i could get it done in one piece with a resin printer
>>9529981This amazing set up seems to use more expensive official kaiji pieces.You could try searching through these sites:https://www.orientaltrading.com/https://wholesalejapan.shop/https://www.aliexpress.com/Oriental Trading is an old and reliable site.A lot of what Aliexpress has is bootlegs.Never used Wholesale Japan.If not, I guess you could just go around your local town and see if any of your grocery stores, dollar stores, Convenience store, gas stations, or if you have any left; malls and see if their vending machines have them or similar.
>>9407972oof my just broke today
>>9532299>>9407972>>9407954i don't know if anyone's tried this, but i fixed mine by drilling a screw upwards through the bottom that acts as a stable column.
>>9523634I thought they were all limited edition
Maruttoys Tamotu Pro by Kotobukiya. Neat partner bot.
>>9543006considered getting him. Every color is still available to order which is nice.
>>9543006While I love Tamotu and really like the metallic frames on the Pro versions, I’m kind of on the fence about Pro. I’ve got every color except the clear one (haven’t built light blue yet), and I’m due to get both versions of Noseru any day now, but the Pro add-ones just don’t strike the right tone with me.My kid is excited about getting the Pros, though.
>>9532263What's this from? I really recognize the scene but I don't know why
>>9543006>>9544986not even 1/12
>>9549391>>9544986>>9543006I've been debating ordering the Tamotu and you guys pushed me over the edge, so thank you!I got the orange one in case you're wondering.
>>9549451Orange is nice, but the two with colors chosen by Moderythm are the best so far. Especially because they come with two complete sets of shell sprues, so you can do a fair amount of design variation out of the box.
>>9549453Well shit, I guess I'll order those next payday. I do intend to assemble this one then decide if I'm going to paint it or not. Depends how well the orange pops irl
>>9549312Akane, one of the villains from SSSS Gridman. That's her room filled with Kaiju models and trash, you might be thrown off since the lighting is different.
>>9549463The blue and orange ones could have been better. Something about the quality of the plastic doesn’t look great right out of the box. Maybe with a topcoat they’d pop a little better, but I feel like the problem is the plastic is very slightly translucent. The black and white ones, and the Moderythm ones look good without any additional work, though.
>>9549475Thaaaat's the one, I only watched a couple of episodes which is probably why it wasn't cemented in my brain.>>9549537The orange one will likely be the one I modify in that case, I intend to make it look beaten up and rusted, like a well used bit of industrial equipment.Do you think this would be a good start kit by the way? It's the first I've ever purchased.
>>9549601Nice.Yes, the Tamotu kits are excellent starter kits, especially if you plan to weather them. The inner frame is super sturdy with thick joints, so it’ll feel very much like a toy rather than a model kit. The frame also snaps together snugly, and feel great when you’ve got it all together. The only part that you might want to do any sanding and gluing is the dome on the head, since it’s two pieces. All of the promotional shots show it as one piece, sadly.Pic related: Orange is as it comes. White had seams welded and sanded (head, legs), then painted with white and top coated with high gloss Tamiya. Bottom is the Light Green kit showing the inside of the dome,
>>9549601>>9550096By “excellent started kits” I mean that my 6-year old built the light green kit with me, doing all of the cutting and assembly while I did the trimming and finishing.
>>9550096>>9550097That's reassuring, and as for the cleanup, I collect Warhammer so I at least have a head start in that general area.Thanks for the pictures as well, really helps!
>>9550097Does he enjoy among us and fortnite too?
>>9550687Thankfully, he does not know what those are and is strictly obsessed with Super Mario Bros 3 right now. I have a few Fortnite toys, though.>>9550684Oh yeah, if you paint Warhammer minis, you’re going to be way ahead of the curve. There are a ton of good repaints of Tamotu out there, and Miz retweets a bunch of peoples’ builds if you scroll through his twitter history https://twitter.com/maruttoys_miz
AKM's coming out on May.
Been eyeing these skeletons. Anyone got them yet?
>>9555134Pics over in the Gasha thread.
>>9420590This is cool. Where to get?
>>9523634I love what I see too much. I've to look for that fucker now, thank you.
>>9501290That's a matchlock arquebus. It is neither a flintlock nor a rifle.It's specifically referred to as a Tanegashima, named after the island where they were first domestically produced in Japan.
Picked up one of those model desks off of Amazon. It’s pretty nifty
>>9556710That the one made by Hasegawa?
>>9555676i got mine off of amiami, it's a dragon horse camping set
So from the recent livestream by Good Smile (same guys who makes figma) announcing kits for the Moderoid line, they're apparently going to make the Power Loader from Aliens. And it's 1/12 scale.
>>9556710Mayberry Street from Hobby Lobby and there website are okay too. Can confirm.
>>9558091Uh, anon. Unless you got some information or comparison we don't have.
>>9558566https://youtu.be/zJf8x5QN8So?t=591You could always look it up y'know.
>>9558532This looks a lot better than the desk I got. I’ll have to check hobby lobby’s.
>>9558091>1/12 power loader joustingkino
>>9558091Tempted to get this but I have a neca power loader with a kenner remake Ripley i got years ago. Still it looks really cool.