File: IMG_20220411_232553.jpg (3.93 MB, 4000x3000)

3.93 MB JPG

>>603791
Almost done just gotta glue the half's together, I used cardstock and hot glue and discovered the cardstock warp badly if creased to much of off angle, of course a ruler should always be used, I discovered some of my geometry is wrong so in V2 imma correct it and, speaking of v2, I think I'm going to do a full body sculpture next, arms legs, and a pretty face to go with it, and bigger breasts, so far it took 26 hours in printing, cutting, folding and gluing, but best model I've done.

>>603854
Whatever you're gonna do anon for love of God don't rush it. More than half of fuck-ups were due to me ignoring something important or skipping a step.

File: Ciccio holds a sign With (...).png (6 KB, 184x292)

6 KB PNG

>>603852
Good Job Pal

File: 1650304865389478384536712(...).jpg (3.34 MB, 4096x3072)

3.34 MB JPG

Starting headless 2B. This time I grouped parts together for each limb and torso. I'll be cutting, bending and assembling them separately. This way I can hopefully get results faster as there's not gonna be time wasted rummaging through pile of hundred some pieces.
It's great that this fad took roots, much easier to get back to work when I see other "enthusiasts"

>>604015
Your unfold is pure crap, that's why the model looks like crumbed-up crap as well. Not to mention the original 3D model was probably automatically reduced and the polygons look like shit. Built the 3D model over, actually manually reduce polygons, unfold it the right way, and start over. This just looks like used toilet paper as of now

>>604019
Lotta shitflinging, not so much constructive criticism.
>Not to mention the original 3D model was probably automatically reduced and the polygons look like shit.
Oh DO mention, i have no use for reductive response. Are you trying to say i went too far reducing base model?
>Your unfold is pure crap, that's why the model looks like crumbed-up crap as well.
Elaborate; what is so wrong with acctual unfolding? I usually let it auto, then cut it down into manageble pieces and group back together>>603623
>This just looks like used toilet paper as of now
Follow the threads. I did not expect any of the models to come out looking as milion bucks. I just saw pics of OP model i decided to give it a try with my fat fingers. And that certainly does not mean that model is my goal.
TL;DR: 1) No 2)Yes 3)For sure 4)Go fuck your mother.

>>604015
way to get after it man. I'd like to give it a go myself. just lurking and trying to build up motivation for now.

>>604041
In my exp it's better to build self confidence doing (easier) stuff rather than waiting for motivation to show up someday. There were rough patterns in last thread and more can be found on web.

File: mort.jpg (788 KB, 1200x1600)

788 KB JPG

>>604015
I'd do your printer a favor and turn the texture off.

>>604015
and oh damn turn the edge id on.

>>604069
>>604015
fucking hell I didn't notice that either. just reprint and start over or you're in for a world of pain.

>>604068
>>604069
Idk why I have to turn those on/off every time, nip devs should add permanent setting.
I already reprinted another set with id turned on.

>>604080
With the edge ids on, during assembly you can keep the pdf open. Ctrl+f will help you find the mate of a piece.

>>604092
Since I have laptop with Pepa at hand I prefer to use that during assembly. It would be possible to build completely w/o edge id but as it turned out during trial you can easily mismatch pieces where there's many mirrored parts.

>>603852
>when you think you know everything coomers are capable of then visit /po/ on unrelated business
why am I surprised

>>597550 last thread for those that missed it

File: 1650808765512370878889805(...).jpg (3.18 MB, 3072x4096)

3.18 MB JPG

It took me 5 hours to assemble one low poly leg. Let's see if I can do it faster next time.
>InB4 it's shiiiiiiit
I already printed it out so it'd be waste NOT to do it.

>>604113

File: 1636650695209.png (5.79 MB, 6216x3744)

5.79 MB PNG

>>604113
Archived

>>603852
>visit /po/ for first time bc tired of porn in /b/
>this

>>604355
whyd you want it to be faster dud? haste makes waste..just do it at your own pace, so you dont regret the result later..good job btw

>>604585
Cocktail of impatience, hunger and overblown expectations. I'd like it if I could do it in one sitting, perfectly and gloat over how amazing it came out.
I still have a lot of work on myself.

File: 1652050528602832611893211(...).jpg (3.67 MB, 3072x4096)

3.67 MB JPG

Boy how I wish I'd started during corona. Could use some of that NEET time.

>>604604
yea me too..tho more often than not, when i look at it my work again, i feel some things can be fixed if i had more patience..to each or their own, good job btw

Second leg. Not much faster but slightly better than first one. Time to prop some supports.

>>604643
>feel some things can be fixed if i had more patience
Regardless how careful you are before, after you add glue it's do or die anyway. Being it like that I'm gonna do it over and over again till I get better at it.

>>603854
Is the upper part purposely on the lower part backwards, or did you not notice that the tits and ass don't go on the same side!?

>>603852
>>603854
>type /po/ instead of /pol/
>see this
the fuck going on here

File: Pygmalion_(Raoux).jpg (943 KB, 1436x1898)

943 KB JPG

>>604736
"Pygmalion, a sculptor, makes an ivory statue representing his ideal of womanhood and then falls in love with his own creation, which he names Galatea"

>>604739
Baroque artists' vision of women beauty never cease to amaze me.
Not that i'd wann replace it with cornfed T&A.

>>604730
This!
THIIIIIIIIIIIIIIS!

>>604736
you've come to the only good board, my friend

File: 1652886625466667637623076(...).jpg (3.61 MB, 3072x4096)

3.61 MB JPG

Fooling around with PU foam is getting costly. If I found some alternative I'd jump it like OP's mother.

File: B0BFAA4A-B72C-400A-B95B-E(...).png (237 KB, 1000x577)

237 KB PNG

>>603852

Damn bro decimate that mesh wtf! you crazy!

>>604893
It's already pretty low poly, ain't gonna decimated it further and turn it into Minecraft Steve. Depending on how it works out I'll redo model from original, this time reducing polygons to less-er degree and maybe cutting off arms from shoulder to elbow.
Btw anyone got these gay pop up
ads now?

>>604896
Sry for not posting progress lately. Getting errors connecting to 4channel for some reasson.

>>604962
Got to remember that excuse next time I am shitting up a 4chan board and getting banned for 2 weeks. Yeah right bro, sure, sure...

>>604963
Thank you for bump, kind stranger.

>>604068
Ebony ENA

>>604962
have you tried clearing your cookies? also nice waifu project.

File: IMG_20220525_054109_949.jpg (4.82 MB, 3072x4096)

4.82 MB JPG

Turns out foam filled/expanded unevenly in thighs. Feels bad man. Wonder if it would have been better to fili it completely and see if it would rip.


>>605050
Yeah it was something with cookies, thx anon.

>>605061
looks good to me!

>>605061
Maybe dip cotton balls in like a ruber epoxy? I just dont know if maybe the paper will then absorb and warp either way.

>>604068
Reminds me of The Object
Which would be a cool project

File: 1654005527623552745758136(...).jpg (2.66 MB, 3072x4096)

2.66 MB JPG

So filling already build model through randomly poked holes is NOT right way as it turned out because I really don't have idea where it landed and if it stays there.
So much for model 2.

do not give up.
this is some viral shit

>>605061
hnnnng

>>605169
>oh anon, what are we gonna do on the floor -pomf-

File: 1477290466125.jpg (18 KB, 460x468)

18 KB JPG

>>605179
>this is some viral shit
This is cereal business not (You) magnet #785521

File: 1654356412306305366368887(...).jpg (2.89 MB, 3072x4096)

2.89 MB JPG

Turns out there was slight offset that led to rotation of upper body. Back looks fine but belly is a mess. Gonna try a bit of domestic violence and amateur surgery to fix it when I'm done with assembly.

>>605250
ganbatte anon

File: life size rem.jpg (183 KB, 640x1344)

183 KB JPG

>>603852
Imagine being such a weeb that you make shit like this

>>605169
reminds me of those gore images of women multilated by mexican cartels. you autists are scary

>>605304
>reminds me of those gore images of women multilated by mexican cartels
That's your demon, our autism has nothing to do with it.

>>605295
Unironically based, the person who did that is actually very dedicated, but if I was the one doing it, I would have increased the breasts size at least by 4 times. Too small for my liking.

>>605325
If they can't give me a black eye from the sheer weight, I'm not interested. I agree.

File: 1655394816549818834803799(...).jpg (3.02 MB, 3072x4096)

3.02 MB JPG

Bump

>>605295
That’s awesome

>>605295
One of the best waifu

>>603852
calendar in the back means you're german, OP?

File: 1655873379173640443603523(...).jpg (3.22 MB, 3072x4096)

3.22 MB JPG

Bump

>>605563
I'm stoked. ganbatte.

She's coming along great.

>>605552
Pic in OP is work of some german woodworker that was posted in "how to build gf" on /diy last year that sorta started this fad.

>>605552
>>605600
It was the pic from the last thread so I just used for simplicity sake, also I have t been able to design my next as I am in the process of moving, I have half the model in a blender file just need to move and finish making the mesh and getting the geometry right so far tho it's a thousand times better then my last one>>603854

>>605563
YES dude I wanna FUCK this paper model's TITS

>>604736
same lmaoooo

just passing through, i see tits i click, im a simple man
no judgement just curious, whats going on here? what are these dolls for? shits and giggles, fuggin? dressing up?

>>605648
Feel free to build your own https://www.mediafire.com/file/kofcxxuaup254pw/b2headles+final.pdo/file

>>605688
All of thosse but mainly i guess i got curious how far can i, someone with no artictic bone or papercraft skills, get with such paper sculptures.

>>605707
>https://www.mediafire.com/file/kofcxxuaup254pw/b2headles+final.pdo/file
oops
https://www.mediafire.com/file/sihgvsd6pqrnzje/b2headles+final.pdo/file

>>604736
>types /po/ instead of /pol/
>develops papercrafting hobby
many such cases

>>604753
My hobby is to commission artists to draw rule 34 version of famous paintings and statues.

>>603852
i never go on /po/ this is the first thing i see and im more impress than gross out. like i aint even going to make fun of you.

>>605824
>the shitposting to origami pipeline is real

>>605870
same. i just clicked on /po/ because of curiousity and i visit /pol/ daily. it's funny to see people activley attempting to build waifus. imagine the desperation and dire need for cumbaskets.

>>605917
>imagine the desperation and dire need for cumbaskets
reach harder

File: 1657219398877141447369563(...).jpg (3.05 MB, 3072x4096)

3.05 MB JPG

>>605917
Dude, there's so many ways I could get my rocks off. Look at this fucking delicate work that takes hours on end. Look at it and tell me. Do you honestly think there's anyone so out of options he'd choose to do this to cum?
Think again.

File: 1657231694393209127016830(...).jpg (3.57 MB, 4096x3072)

3.57 MB JPG

Single finger per hour. Who would do that for lewds when you can whack off in 5 minutes and be done with it.

>>603852
Fuck now I want a paper woman. I never made origami in my life

>>605648
You literally can't use it as a sex doll without destroying it. Fapping would be cucking yourself

Sister thread >>>/diy/2418646

>>605061
Tracking from /diy/
Poly foam isn’t a great option for reasons you’re seeing… unpredictable strong expansion.
Suggest poly fill, like they use in stuffed dollls and quilts. You can get it from joanns fabric or such. Then you can modulate how firm to make outside by how much you stuff in.

>>605977
The other thing: I’d be surprised if this will stand upright without collapsing under its own weight once you fill it (or even infilled.)
I’d plan a basic skeleton consisting of two rods running from base of foot to shoulders ( since no head.) It would be V shaped and connected at top. Depending on design may need support also for arms to some extent. You’d insert rods after paperwork done then stuff around them… you won’t likely be able to add them after the fact.

>>605977
checked.
>polyester filling
Not bad, not nearly as costly as i'd expect tho i have no idea how much it's gonna take. Still might prove itself better alternitive to foam than hay or shreded newspapers.

>>605932
I'm bummed you put so much time in these things with junk paper. Some decent cardstock is pretty cheap.

>>605986
Just massacre some old stuffed animals.

>>605304
I find both to be quite arousing. Obviously this is far more impressive than creating art with a machete and a liveleaks account

>>605993
>implying
I don't own any, not gonna buy any for it would be cost ineffective and not gonna steal any since that could run danger of revealing my powerlevel.

>>605986
How much you need depends on how tight you stuff it.
If you’ve never bought from Joannes… you want to get on the mailing list for coupons. Stuff is typically sold at 30% off as a category markdown or on coupon. It rewards coupon clipping.
>>605988
Seconding. You should to be working with cardstock at least with the lower parts and main torso. It’ll be stronger and stuff tighter.

>>605988
>>606026
I have to use office paper cuz i'm not gonna buy one of those fancy expensive printers that use cardstock. What i'm later gonna do is buy heavier paper and glue my printouts onto it. Not sure how heavy tho since if i go too heavy it's gonna make flaps too sturdy. RN looking on some 150g/m2 but thinking about it now added 80g office paper and layer of glue might make it too tough to work.

>>605926
> Do you honestly think there's anyone so out of options he'd choose to do this to cum?
obviously not. it's an artform, recquires preperation, dedication, dexterity, patience and time. it's honestly impressive such such life-sized origami dolls. you gain extra millage and experience, just by engagnging yourself in artistic persuits. i would still consider it inferior to 3D modeling, but it's a craft, and a great hobby to do at home.
good job anon. i'm glad you have your own private space, eg appartment, to work unhindered and post updates.

Mom- go get yourself a girlfriend

OP- ok

lol, good work model looks good.

>>605977
>Poly foam isn’t a great option for reasons you’re seeing… unpredictable strong expansion.

One issue with the consumer grade aerosol foams is that they need lots of area to off-gas the solvents that keep them liquid in the can, which means that in closed spaces like tubes and deep vessel shapes (like those leg shells) the trapped solvents can create all kinds of problems like uneven expansion and cure rates, soft/ gooey spots and voids where gasses in the extremities get trapped and create back pressure that prevents material flowing into them.
Two part pourable expanding foams made for filling closed space in boats and dock floats and the like largely avoid these problems as long as you get them poured while still liquid.
They cost more but will work with even lightweight paper molds/forms and in other deep/closed vessels and spaces.

>>603854
Absolutely fucking disgusting tits.
Why are you so disgusting?

>>606028
I've run manila folder paper through standard home grade printers with zero issues....
>>606060
What trade names are these sold under?

File: lacksproperfilename.png (216 KB, 455x639)

216 KB PNG

>>606055
>i'm glad you have your own private space, eg appartment, to work unhindered and post updates.
TT_TT If only. Sometimes i realy miss being no-life loner.
>>606060
I am not married to idea of using PP foam. If i could use some stuff that would stick to paper but not soak in and sufficiently hardened it i'd jump that in a hearthbeat.
>Two part pourable expanding foams made for filling closed space in boats and dock floats and the like largely avoid these problems as long as you get them poured while still liquid.
They cost more but will work with even lightweight paper molds/forms and in other deep/closed vessels and spaces
For now at this stage that's way too expensive for what it does. I believe it works but i'd sooner use hay and i'm saying it as alergic motherfucker.
>>606064
Depending how tough (grams per m2) they were i might waste a money on potentionally permanently fucked up printer. For now imma sticking to office print outs on hard paper.
After i finnish mark3.

Have a free reaction pic. Needs name tho.

If you cover the outside with enough layers of spraypaint is it robust enough to have sex with?

>>606214
1)you can not normally spray paint office paper shell for it'll collapse under added weight. You'd have to use some low deposit non soaking like a hair spray (noz very cost effective).
2)common polymer paints harden into tough plasticso don't expect any give from it. If everything goes right you'd end up with basically clothes shop manequin (tho those are made from glass fiber composite)
3)so far no articulated joints
4)one way or another you'd have to add fleshlight or onna coz nobody is so hard to enjoy rubbing against acrylic vagina wall
Let's not kid ourselves. While we may see some anon producing something fuckable in the future, if you are looking for sextoy you're better off with onna or those small Shiro Dolls. I believe there are sextoys geneals in otaku and toy boards.

>>603854
nice frontbutt

>>606069
Baby face

>>603852
i've visited /po/ like, twice ever before now and may i just say, this is EXACTLY what i expected from this board, short of using cum as glue

>>606238
you... you're not using cum as glue...
right OP?

RIGHT???

>>606238
>>606243
glum

File: 1658482708327481724818788(...).jpg (3.55 MB, 2736x4864)

3.55 MB JPG

Not sure if anons are impying i have humongus pair of balls or if imma such disfunctioning dirty fuck that i would use my own glue.
That said, since i switched to smaller bottle with smaller applicator, my glue usage has dropped drastically.

>>606238
I came here by accident today, intending to visit /pol/.
Then I came here on purpose. ;)

>>605250
What's that shiny thing on your dick?

>>606390
Callus Onanii

>>606069
realistically, you will be able to print damn near anything though a home printer as long as its paper, comes in a printer size, and meant to be printed on.

as for wasting money, 5$ for some cardstock, that I used on everything I made, running it though 3 brands of printers, kodak, hp, brother.

File: Asuka Life Size Paper Doll.png (1.24 MB, 640x889)

1.24 MB PNG

does anyone know if the japanese from picrelated.jpg ever droped files of how he make this ?
hell a STL of this asuka will be fire

>>606390
>his dick is NOT slowly turning into bad dragon dildo...

>>606547
the man you seek is sansogyorai00, his twitter is locked but his yt channel is still up
https://www.youtube.com/user/sansogyorai00

I hate paper so fucking much bros
Wax tablets are peak western culture
Barring that dry erase board are OK
Screens even are still better than faggot ass wood purple. Gay anons stick a hunk of wood up there ass and wood mites gets in their monkey pox sores and go on and on about paper
It's non white sickness

xD

File: 1659996432197807650434070(...).jpg (4.56 MB, 4864x2736)

4.56 MB JPG

Took ages. Would like to say i overcome many problems and found as many solutions but other than having to use tweezers tu put fingers together i got nothing. Fingers are blocky and of wild variety in level of detail yet still were pain to connect and close up.
At least rest of arm is gonna be big square faces tho i again can't help but wonder if model would look better without those puffy sleeves.

I now believe that hands need special treatment similar to how face has been edited separately from rest of the model.

>>606547
>>606577

guy was a genius and was slowly going blind in his messy apartment and i regret ever showing you spergs him, one of you mentally ill troon faggets harassed him and he locked everything down.

>>606691
>one of you mentally ill troon faggets harassed him and he locked everything down
I am in no way apologising those shits how new are you that you did not expect it.

>>606727
>t.do-nothing-bitch that does not get laid

File: 1660648430145.jpg (19 KB, 300x300)

19 KB JPG

>>604100
Nice dubs!!
Checked.

File: 85ee1a56.jpg (170 KB, 792x1280)

170 KB JPG

>>606547
>a

File: head no eyes no hair.png (388 KB, 1600x707)

388 KB PNG

Im sort of tangled up lately and got no more progress on arm so far.
Other than shamelesly bumping thread here is her face minus eyes+hair since they were way too complex to keep. Feel free to criticize but if possible keep your criticizm constarctive, not shitpost and ghost like >>604019
https://www.mediafire.com/file/y871m7ekoxv7vx6/headonlynoeyesnohair.pdo/file

>>604736
>>605649
me three

>>607030
Four. Da fuq!

Arm fel on ground fingers first not long after finishing. My fault since i did not fill them when i have done work about around wrist. What a mess. Perhaps it's a sign i should re do it from base model up.

File: hand 2.png (131 KB, 533x410)

131 KB PNG

Hands on OG model are surprisingly not that detailed, let's see how much Führer Pepa cuts down on vertice count.

File: hand 2 pepad.png (98 KB, 598x696)

98 KB PNG

>>607648
>Führer
*further
Can't say they look too different from originals but at least fingers seem to have consistent crosssections.
Looking at it i might be better off smoothing those fingers via removing those tree-ring joints on fingers since they are not articulated and hands gonna end up like rakes anyway.
IDK

bump

File: 1663688206481567275930663(...).jpg (4.07 MB, 2736x4864)

4.07 MB JPG

>>607835
Thanks, i'm not so sure how often one have to post to stave thread off oblivion.

>>607846
theres not much activity in /po/ (which is good) so we will be in the first page for a long time its only when we are at page 10 it will start to shut down the thread

help

>>604475
Bro, why is your pc on the wrong year?
Trew me way off

>>607877
With what?

>>607889
What do you mean? That thread started last summer.