Self-serve ads are available again! Check out our new advertising page here.
posting
more
>>552869This pains me
No, your inner demons hurt you. ACCEPT THE TRUTH. ALL SHALL BURN!!!
>>552869
>>552868what a fucking atrocius editingthis is 12 years old tier stencil
>>554150Stay mad porch monkey.
>>554154
>>554156
Keep in mind, I haven't done the bridges yet. Should be simple enough though.
>>554155Nice dubs
>>554154>>554155>>554156>>554157>>554158Does Anon have anymore?
>>554221Me again. No bridges yet, but I just made this one.Anyone else prefer doing bridges by hand rather than on the screen?
>>554154Hey, these are great! Can you explain how you make these, please?
>>554234
>>554234>>554269
>>554234>>554269>>554270
>>554234>>554269>>554270>>554271
I tried to make one did I do good
here
i've been away too long. stencils where pretty much banned after some trolling.
i actually don't stencil. but stencils on this board got me into carving pumpkins, so the rest of my collection are those sort of stencils.
remember when po was overflowing with threads like this? I probably have close to a thousand different ones saved on my computer..and never use any of them everwhy even?
>>554150How DARE YOU speak to ME like that you fucking gurgle spit of a semen stained cumrag wringed vaginal SOUP baby. I TELL YOU when YOU talk to ME you fucking INGRATE SHIT CUNT. You wanna come in here, in MY FUCKING THREAD, and you DARE to have the bitch NERVE to tell ME how to RUN my GOD DAMN THREAD? LISTEN FUCKER. You think your faggoty boy bod can compete with my masculine man meat of MINCED MOLESTATION? YOU GAY AND ALSO HOMOSEXUAL QUEER BOY? I'll bend you over and give you all 4.7 inches of my raw fucking singles power, give you what you CRAVE, give you what you DESERVE, what you THRIVE ON. I'll penetrate you with such raw fury and blast your ass so hard and work up such a sweat our fluids will be red white and blue, the most PATRIOTIC ASS POUNDING since your MOM sucked CLINTONS COCK and your DAD sucked CLINTONS CLUTCH. Do you UNDERSTAND the WORDS i am TYPING you slutty fifer? Your eyes are getting fucked by slam poetry in the sixth sense. I'll ride your (you) and fuck you till you jew, I dont care if this board is blue, you anonycuck. DO YOU HEAR ME? I'LL EAT YOUR ASS WITH FURY AND VENGEANCE.I eat newfags and shit redditors, son, I'll smack your ass and call you a fag and you'll LIKE IT so much you'll SUCK MY FUCKIN VEINY THROBBING MEMBER you shark tossing cock. You fucker.You god damn cocktrucker. You fucking little prickly taint gobbling hog smacker sister basher fist crasher ALABASTER NIGGER. Suck my fucking reply count. Heres my (you), now fuck off and die forever in your daddy's shit stick closet.
AAAAAAAAAAA
AAAAAAAA
Oh wait.This fucking thread is from five months ago.That means this board is circling the drain, reaching out to me, Anonymous, to save it.I spit in your face, board that doesn't even advertise what all rad shit it has. I thought all this shit was weebs taping their eyes to their temples and playing pretend. 4chan, you disappoint me perpetually. Goodnight newfags.
>>557150You're a fucking faggot dude ahahahaha.
>>557150eat poo & die, """ amigo """
i need some more sick stencil designs. there used to be this really cool pitbul one on here a while back. i cant find it again. it was a realistic one of it looking up kinda
>>557150doesn't even post a proper spraypaintable stencil
Old thread but as a reminder to any aspiring graffiti artists if you're thinking of using stencils to get up, don't. You look like a hipster faggot and other writers will always go over your shit first.That being said stencils for any other purpose are cool as fuck, just thought I'd warn anyone retarded enough to think using stencils for graff is ok.
>>562184who made you boss? faggot.
>>554335That looks so fucking cool, I'll make it on paper tomorrow, thanks man
>>562443me, this one is me
>>562444these trips are so fucking cool
I used to only see stencil posts on /b/ forever ago.Thank you all.psst...I know there are some awesome Bill Murray that work very well.
>>562651This,but better.
>>554409zip 'em and upload maybe?
>>552867That's a nice silhouette but it pains me to see that it's not proportional.
Instead of spray paint
Eco friendly
>>552869I have this spraypainted on my bin, been there like 10 years
anyone got a shimapan stencil?
>>554062The cringiest bitch to ever live
It'd be finicky as shit, but the style lends itself; plus you can make it spew/say whatever you wanted it to
>>552867stenciling, what is it good for? absolutely nothin'.
>>566133huh....yeah....
/r/ more anime girls
What can I do to improve this stencil?
>>5668831. Remove all unnecessary details, and then some of the kind-of necessary details on top of that. If you notice it disappear when zoomed out, keep it. Detail is a right bastard to get right, so it's often easier to smooth over into different, larger shapes. Makes the stencil easier to cut out and more stable to hold/spray around2. Bridges. If you want to cut the white bit out to outline around, these are the things that keep the thing from tearing apart in your hands since you can just go over it in post. Obviously if you are just cutting into a piece to spray into the black bits, you can ignore this image, because you'll have different islands to deal with and bridge (most would be in the hair). Ideally, make the bridges obnoxiously big and connect a few points together, it makes the stencil more stable and harder to miss them when going over it post-spray. On the flipside, smaller bridges (like in the hair) are stupidly fucking tedious to get right, easier to fuck up the entire piece with a slip-but harder to notice if you get it down. Dots (like the ones attaching the hair to the face) are shit easy to do, add a nice amount of stability and are overall good calls to pepper longer stretches with (just remember they exist)3. Don't forget, you are essentially free-spraying when bridging shit, so take that into consideration. Alternatively you can make another stencil with the white added to the black and the bridges as white, then spray those inwards. Be careful however, because if you get it 1mm off; it looks really fucking weird and disjointed.
>>566979*If you don't notice it disappear
>>566979Thanks famalam.
Minor dump incoming>>564336Fixed it for you
>>567534and sprayed
>>567535and finally a personal project. Can't dump the stencils now, but I'd be happy to later if someone wants them
>>564676Yea. This is fake and gay. This is some moss art made by a chick call Anna Garforth .The moss is grown as sheets and then its cut out.
>>567536That would be cool original content
>>567689Branches are an absolute bastard to score, careful
>>567689River is an absolute bastard to tack/keep down, careful
>>567689Actually this is the easiest bit, just do 2 coats to cover the red/colour from the river. Careful with the deer skull if you want to bridge the red bits to form the eye/nose socket, I gave up in the end because the cuts were too fine; but f you did it on a larger canvas it should be quite easy once you've done the branches
>>567055This is so unappreciated, and I'd like to fix that.
>>567642That's not moss, it's grass grown on turf.
>>567689>see your own stencil posted from years agoHa ha ha oh wow.
>>567822I've seen this stencil on /b/ like 7 years ago.
>>564702HAHAHAHAHAAHAHAHAAHAHAAHAHHAHAHHAHAHAAHAHAHA
what are these stencils used for and how do you use em ?
>>568822Spray stencils. Use a scalpel to cut the bit you want paint to go through, then spray it on whatever surface.Now shut the fuck up and lurk moar newfag, it should have been pretty fucking obvious from the guiudes that were posted in the thread already
Does anyone here go out and spray some? Ive tried a few banksys and an original design. I print with rasterbator on a lazer printer directly on 250 mic clear binding covers. Works wonders.
>>569446I don't go outside to do it on walls and shit (in part because I don't go outside at all) but I've amassed quite the small folder of completed stencils.I personally don't mind if my paper stencils are one-time use or not, providing they just turn out well. Such is the way of the poorfag
>>569451I actually need help stenciling a drawing of a boat. If you want to help. This one is my original design i made this week
>>569457Post the pic of the boat and I'll see what I can do. Not too sure how this 4channel shitshow is going to blow over, but I'll still try lurk my homeboard, in my homethread
>>569490Soon
>>569542Fixed that for you
>>554158Hey I made a bunch more after seeing this thread was still upMods pls no delete
If anyone tries any of these out I'd love to see the result
>>568896there are islands all over this picture? This isnt even a stencil.
>>569685ayy lmao
>>569761>he doesn't know what bridging isYou're supposed to do the red in post, dummy [spoiler]that is, if you can be bothered[/spoiler]
>>569451Can confirm that it's hard but possible>>569684See if I can do this next, it's so unrefined it might be a good challenge
Haven't done stencil stuff for over a year, keen to get back into it
>>568173I first came to /po/ in 2007.Back when /po/ banned stencil threads I made that to post to a thread that lived for a few days.I only drop in here every few weeks. /po/ is no fun with no designers.
>>570093Cool welcome back and droWelcome back
>>570152Cleaned that up for you
Anyone have a good stencil for a tree? Something about A4 size, profile of a cherry blossom (or thereabout)
>>570837how wrong is it that I unironically like this?Does it show too much that I'm training to be a cop?
>>570001可愛いだよなぁ
>>570977>armed contractorI might do just the “question authority” on my ar mags.
any decent ktulhu stencil?
>>572909
>>573507
>>573508
>>573509
>>573510
>>573511
>>573512
>>573513
>>573514
>>573515
>>573516
>>573517
>>573518
>>573519
>>573521
>>573522
>>573523
>>573524
>>573525
>>573526
>>573527I haven't gotten around to fixing this one yet, but it shouldn't be too hard to do.
>>573528
>>573529
>>573530And I'm out.
>>567711that stencil sucks ballz
More lewd ones.
>>573528Here ya go mate
>>564676has anyone tried this?
>>574503I'm very curious about this as well. The images at the bottom at least look more like thin turf that has been precut and affixed to the wall. But if this actually works that would be pretty fucking dope.
>>574503>>574523This does work although the outcome varies a lot.The images shown are optimistic and too nice to be real ,speaking from experience.There is a possibility that you will have to get the ratios figures out yourself, for me it worked partially the first time, most of it fell off or didnt grow in some spaces. But after few tries it worked well, i "painted" a small wall near the house to make it look a bit nicer.Just have in mind that its moss, and if you want it too look as green as in the pictures you would have to spray it with water a lot, for artsy things i wouldnt recommend it, but for planting moss on walls etc its great
pagan and celtic knot symbolism looks lit for stencils
posting in 2 1/2 year old thread
>>575088You obviously can't count.
>>574193Cheers.
>>564275>>564275 yes the scale is off somewhere. length is wrong.
>>565965where's the rest of her?
>>554152>>562478>>567055>>575383>>576076Accidentally click /po/ and not /pol/. Look like im not the only one.
>>576076Nazi loving bastard!!!!!
>>576422>Nazi loving bastard!!!!!That's rude. Reported for hate speach
>>576473Then stop posting that goddamn Nazi shit.That shit has been abolished for years and there's no sense in constantly bringing it up.
>>576473>Reported for hate speachAnd I don't give a damn.
>>576473You're the one who needs to be reported for being a Nazi lover and probably a skin-head white supremacist.
>>576473Freedom of speech, dude.
Hey PO, /diy/er here. Saw this stencil design and cut her out on some 4mm bass wood, currently building a cabinet with frosted acrylic backing with plans to light her from behind with LEDs.Tldr: thanks for inspiration >>568657
>>576915That's awesome, great work! Would love to see the finished results eventually.
>>576915Great wood working skills, plz put finish product
Finished woodwork guys, trying to decide how to backlight it now.
And illuminated :)
>>576990>>576991Lovely! You're incorporating this into full cabinet?
>>566133I used it to label a box of ham radio equipment.
>>552867>>577045Any tips on spraying a better stencil? How about for cleaning up the jagged edges in the source file? They're not really a problem since they can be smoothed while cutting, but it would look nicer posted online.
>>577045>>577046Original symbol for reference.
Taking a request because fuck it why not
>>554062Who he fuck is that cunt?
IAm Banksy, AMA.
>>577079Chick from NCIS, was to goth culture what Big Bang Theory was to nerd culture.>>5770801. Run out of walls yet?2. How'd you get away with vandalism in the UK (because fuck me have I tried)3. Why are you still here? Just to suffer?
>>5770841) Yes2) I get my fans to do the actual vandalism3) Because life is suffering, and also the lels.
>>577085>2) I get my fans to do the actual vandalismTHAT'S NOT ANSWERING THE QUESTION, FAKE FAKE FAKE YOU'RE A FAKE
>>577086I don't need to "get away" with anything because I don't do the actual vandalizing, what's so confusing about that?
does a higher quality scan of this book exist?these stencils look epic. after 91 years i want to bring them back
>>577080You can’t be banks though because I’m banksy
>>577248>>577247gee, that's swell.is it just me or do the actual stencils have way more gaps than the printed examples?I wonder whether I should take the extra effort to use the actual stencils as my base, rather than the much cleaner printed one... though i haven't decided what i'm going to put oswald on yet...where did you get these? maybe they already converted them to some vector format.
>>577241You'd probably have to track down a physical copy (and then digitize it for the rest of us). I can't find more than these same six stencils online. Maybe that's all there is?
>>577321
Thanks, now we have scans of two different physical copies, even if they're low resolution.>>577323>>577248look at the one with the top hat -- in the printed examples he has whiskers in the middle of his face, not just sticking out of it. but not in any of the physical scans. curious. I think the printed examples will work if I cut them at a larger size....I wonder what physical size these were. probably made for pencils and not spray paint...if I get around to making clean B&W images, I'll post them.
>>577348>...I wonder what physical size these were. Pic related. There are some pictures online of museum displays and auctions and such, dig around with your search engine of choice and reverse image searches from TinEye, Google Images, etc. >probably made for pencils and not spray paint...It looks that way. Look at the scribbles on >>577323, also remember seeing a picture earlier of the stencils displayed next to colored pencils.
>>577348>probably made for pencils and not spray paint...>>577321>follow the outlines with a pencil, then color with crayons.
>>577348>different physical copiesThis site (https://www.cartoonbrew.com/old-brew/oswald-stencils-on-ebay-1648.html)links to a dead forum (http://forums.goldenagecartoons.com/showpost.php?p=49433&postcount=12) that once had more detail photos of a stencil set which sold on eBay for $1525. I haven't been able to find an archive of the forum post which includes the images.
I just noticed the retail packaging seems to imply there are more pictures than there really are
is this good enough for any purpose? i used the printed examples from >>577247, cropped them out to six separate png files, and ran imagemagick on them like this:magick raw-painting.png -channel G -separate -threshold 36% -magnify painting.pnganyone think this is good enough for any purpose? The -magnify option smoothed it out as it doubled the resolution, but look at his left ear. Must I resort to hand-tracing to get higher resolution than this? i really want to just machine-convert it to vector and laser-cut it.
an all-in-one attempt based on >>577323magick source2.jpg -channel G -separate -negate -threshold 30% all.pngi know >>577248 has more resolution, but it also has crap stuck to the edges, so i'd have to clean it out in a paint program.time for bed
How do you cut the more detailed stencils? Is it just getting a box cutter or those paper-craft cutters and carefully cut?
>>577388one time I sat down with an xacto knife and hacked out an entire "troll face" stencil complete with forehead wrinkles and "U MAD?" caption at the bottom. It took hours and was very sloppy. But now I have access to a laser cutter, so I can make a perfect one in ten minutes if I want to.There are several kinds of automated cutting and engraving devices, but most are too expensive for personal use, so you'll have to check the art studios, print shops, and maker spaces in your area.
>>577415>one timeHa...yeah...who would manually scalpel out a piece of card with precision and care to create a satisfying endproduct of their own labour....ha....ha...ha..
>>577388Scalpel and 1-2 spare blades.
What grade thickness do you guys generally use? I'm leaning towards trying with 160 or 200 GSM paper, but I'm not too sure (especially since the rest of the board prefers the thinner end of the thickness varieties).
>>577079Edgy cunt suck my dick
Great Gods, this thread is still up? Let's add to it, then.
>>578826Corona virus is really wrecking havoc.By the next bump it's probably gone like water in the desert
>>580414Great start Anon, just need to work on your islanding. Some of those cuts are near impossible, and that stencil would be horrid to try to spray with.
: )
What kind of paper/material you guys use? Im looking for something that I can use a few times before it gets soggy. Some thin metal would be great but I dont know how to cut it.
>>581848>Some thin metal would be great but I dont know how to cut it.If there's a hackshop/makerspace near you, they may have a water jet table cutter or a laser cutter. Otherwise, a rotary tool, file, and sandpaper could work. >What kind of paper/material you guys use?read the thread faggot >>554272 >>554271
>>581848I personally use ~200GSM paper, it lasts pretty much forever for each stencil, provided you don't let paint build up around the edges/inside fine cuts. Metal is going a bit overboard, but depending on what you intend on using it for, as >>581850 says.As for canvases, anything works; but paperwise, ~450-500 GSM is my personal go-to pick if you're doing something you want to hang up (assuming you don't just spray it on the wall)Feels quite odd, given that most of the rest of the board would be on the other end of paper thickness.>>581850>read the threadTo be fair, it's not exactly illustrative on usual paper grading standards; banksy trying to maintain the edgelord persona when he's making a 'guide' or a /k/ommando giving an absolute guide for absolute retards doesn't give much growing room.
>>576915Man how I love laser cutters.I have a cut of spiderman tight as fuck.
>>581848Mylar and 3m sticky.
Edited this one up when I found it, should make for a good beginners stencil. [spoiler]I wonder what the image limit is here....[/spoiler]
Awesome thread. Thanks for the stencils!
Jesus fucking christ this thread is over three years old. Thanks for putting up with us for a couple of days on April Fools 2017, you guys are cool.t. /mlpol/
>>554335my god, i love you anoni like MGS too much and this is pretty good more?
>>584626Not him, but are there any images you have in particular you want making into a stencil?
>>584626Since this is an anime website, you might like to know that Laid-Back Camp is narrated by Akio Ōtsuka, the voice of Solid Snake, Naked Snake, Solidus Snake and Venom Snake.https://www.crunchyroll.com/laid-back-camp
>>552867
Keeping this thread alive. This is a piece of history.
Bump, nice stencils
>>552867very nice stencils, haha
SARS2-CoV-2 restrictions are slowing me down, I'll post a few in the next few days
>>589939>SARS2-CoV-2who talks like this?
new thread here >>589410
>>552867that is the worst ak ive ever seen. try again
>>590225What a spicy opinion
>>589981Not all of us are in middle school
>>552867Based>>565970Reddit
>>565970look at all that edge