[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / r / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip / qa] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
Settings Mobile Home
/o/ - Auto

[Advertise on 4chan]


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


File: shane.jpg (1.33 MB, 1944x2592)
1.33 MB
1.33 MB JPG
"Happy birthday to me" edition
Picked up a new truck, my first Ford (personally, not within family). Needed something to haul/tow for my large scale farm and house projects, and it was a steal of a deal. Started in the lot, drove all the way back home for two hours through the mountains, parked perfectly in my driveway, and promptly wouldn't start again. Still beyond pleased with the pick-up. Share your rigs!

>What's in your garage
>Most recent repair
>Most common thing you haul
>Thing you love most about your truck
>Thing you hate most about your truck
>Your ideal wheel and tire size

Garage: '87 F-150 4x4 w/ I6 300cu, '91 C1500 w/ 389 stroker, Holley EFI setup and built 4L80E, '03 Jeep Wrangler X w/ I6 (not a truck but I've towed with it)
Repair: About to do a starter, potentially a flexplate replacement for the new truck. Praying its only the starter, but it won't engage with the plate. Might be missing teeth. Prior to that was wiring harness redress for the C1500.
Hauling: dirt for garden, and my ass through the mountains
Love: Two-tone paint job and the I6
Hate: Hoping the starter is fucked, might be that and flexplate
Wheel/Tire Size: 15'', 31''
>>
nice truck anon
>>
>>24177070
My dad had an extended cab brick nose in the same color as yours back then. Unfortunately it got robbed by some glow nigs
>>
>>24177070
Based. I have a 90 with the 300 I6. Thinking about rebuilding the engine with upgrades and throwing it in a wagon shell.
>>
>All I want is a fuel injected B2200
>only sold in California
>I dont live in California
Welp
>>
>>24177124
Ty anon
>>24177226
Worst feeling, sorry to hear it. Literal glowies? My first C1500 was a short bed regular cab, walked out from work on a rainy day and poof, no Chevy. Heartbroken.
>>24177290
What kinds of upgrades are you thinking? I want to keep mine close to stock but I plan on doing some updates promptly, distributor, wires and plugs, headers, maybe rockers. If I have to replace the flexplate, the engine is coming out. Might do more if that's the case.
>>
>>24177302
Funny - my young neighbor down the way has one with a camper shell, in superb condition. Doubt he'd ever part with it, though. Great little trucks.
>>
>>24177315
I've done a good amount of research on it on the forums. Seems like the best mods are hypereutectic pistons, metal timing gear, torque cam, and for sure roller rockers. A lot of guys are using chevy rockers because they fit well. Gives a huge performance boost over the stock rockers. Basically im planning on covering up the few weak spots of the engine to make it indestructible.
>>
>>24177319
Yeah I have a b2600i 4x4. Love it. But want a 2wd to match
>>
97 Dakota SLT. 5.2 Magnum V8. Looking for a 94 Ram 1500 4x4 for the winter.

>>24177070
This is a beaut. Love the 2 tone.
>>
File: 20210504_174136.jpg (2.06 MB, 3738x2615)
2.06 MB
2.06 MB JPG
>>24177070
Nice truck op
>Garage
2018 mustang gt
>shop
1970 jaguar xke, and on topic my 1982 gmc s15
>repairs
I'm swapping in an aluminum 5.3 with an AR5 transmission. Plan is to simply get it in and make it drive first, then I'll set about restoring and modding it afterwards.
>haul
Yard debris, lumber, and in the near future-> Ass
>love hate
I love that it's very small and still has a long bed, I hate that it smells like I forgot about it for 6 years inside.
>wheels
It has 14s, probably need a minimum of 15s for brake upgrades but that's not in the budget right now.
>>
>>24177336
Thanks for the tips - heard the same about the rockers. The 300 seems delightfully torquey as-is, wouldn't mind a bit more.
>>24177337
He's got the 4WD as well, I believe.
>>24177357
What're your plans for the Dakota?
>>
>>24177403
>Dakota
I'm getting a Softopper and skip-camping the Appalachian Trail in the bed. Only 60k miles on the Dak. RWD, shes my highway cruiser. Mini trip computer in a 97!
>>
File: 1615414276979.jpg (3.3 MB, 4032x3024)
3.3 MB
3.3 MB JPG
>>24177070
Finished cleaning up the chrome (not pictured lol) and stuck a new fuel pump in since I changed the oil and it reeked of gasoline.
Been trying to clean the glass with steel wool but whatever shit is baked into it is very difficult to scrub out, going to need to find another solution
Have a new emergency flasher switch ordered since the old one has fallen apart and is fucking with the brake lights, as well as a new antenna and some OEM chrome wipers for autism reasons.
Also have U joints ordered which I'm not looking forward to putting in, probably needs the carrier bearing done as well which I might have a shop do if it's affordable since apparently it's a pain in the ass to replace.
>>
>>24177403
I also like the natural aspiration but adding a little low lag turbo to them really wakes them up. Basically negates the downsides of the reverse flow head.
>>
>>24177423
You might scoot through my town if you're doing the AT. Good luck on the hike.
>>
My grandpa wants a nice 50s early 60s truck that’s ready to drive daily, how much would he be looking at spending
>>
File: 20210526_152813.jpg (2.07 MB, 3727x1908)
2.07 MB
2.07 MB JPG
>>24177070
Nice truck, anon.
I've been dailying my '77 for the last couple months. Stuck a new water pump on it before doing a 1200 mile roadtrip with my bike in the back for Memorial Day. I6 300 is still the most bulletproof thing Ford has ever made.
>>
>>24179090
Depends on the overall condition. If he wants one that looks decent, runs decent, I'd water you won't find much for under $8K. I almost pulled the trigger on a '72 C10 stepside, stock with a new paint job for $12K.
>>
File: Dsc202083.jpg (2.63 MB, 2792x1440)
2.63 MB
2.63 MB JPG
I love my trugg

Muh 5.0
>>
File: 20210525_202916.jpg (591 KB, 1209x1209)
591 KB
591 KB JPG
1998 Chevy K1500, bought on the recommendation of you bastards.
>167k miles
So far I've had to:
>New tires
>replaced leaking coolant overflow tank
>o2 sensor
>Washer pump
>Replaced leaky valve on ac compressor
To-do list
>Fuel pump
It runs pretty dang loud
I've had half a dozen people tell me that's an indication it's about to go, and others tell me they all sounding that. Either way, I'll probably be getting it replaced soon, just to be sure.

If I had money to burn right now, I'd have the rusted out rocker panels replaced, an new paint job, and a spray in bedliner.
>>
File: PXL_20210603_163217545.jpg (3.38 MB, 4032x3024)
3.38 MB
3.38 MB JPG
>>24179104
Beautiful truck

My $800 2500 with a home done bedliner paint job from a discontinued breed of bedliner. Had to redo the entire breaking system when I got it because it was borderline suicidal to drive.
>>
File: 1596774372862.jpg (117 KB, 1024x766)
117 KB
117 KB JPG
>>24179090
60's Fords can go for 4-6k running with okayish cosmetics, Chevys are more expensive, Dodges are rare but also usually cheap unless they're in great shape. If he wants one that's painted and/or close to restored probably closer to what the other anon said, 8-12k.
>>24179104
What gear ratio is in your rear end? I have the blue 67 pictured above, it has the 300 and a T18 4spd and it's so low geared it's unbearable on the highway. Looking to swap them out since it'll no longer be a woods/towing truck but not really sure how to go about it. Very nice truck btw
>>
>>24177070
>>
>>24179324
Now that's a tasty vehicle
>>
>>24179515
>>
My gen 8 F150 got smashed up by a drunk, so now Im a ranger boy.
Trying to make it more off road worthy, or just ride it around as a commuter while I look for something in 4x4 again.
>>
File: 1613771423903.jpg (18 KB, 498x371)
18 KB
18 KB JPG
>>24177437
>>24179104
>>24179835
Grandfather had a green truck like that.
>>
File: 3YE F203.jpg (91 KB, 599x599)
91 KB
91 KB JPG
I call this one 'Gas delivery vehicle at 5am in the morning in the rain'
>>
>>24181066
my god its beautiful
>>
>>24177070
>promptly wouldn't start again.
Do a real compression test before any more money is wasted.
>>
File deleted.
>>24177070
Congrats OP on the new purchase, hopefully it is an easy fix to get running again.

>garage
2000 Dakota R/T
>recent repair
Herculinered the bed. Turned out good.
>main thing you haul
Ass
>things you love
Lot of low end torque. Easy to drive, see out of and nimble. Have plenty of space for shit in the bed. With the mods it is a blast to drive, sounds great with the new exhaust and for a truck will surprise you how well it moves.

The low end torque part will change when the crate motor is shipped and swapped.

>things you hate
It is fucking small, I am 6'3" and I feel like lurch sometimes when I drive it. Suspension is shit but can replace. Stiff ride and hard to get traction.

>Tire size
So far love the 20x9's with a 275 Yokohama Apex tire. Not sure how they will do with the new motor, but so far are in all around improvement.

Looking to get some slicks for the stock 17x9's or Durango 15x8's. Need to do some more research.
>>
>>24181680
Forgot to black out my address.
>>
File: 20210605_193132.jpg (1.93 MB, 1960x1912)
1.93 MB
1.93 MB JPG
>>24181680
>>
>>24177070
It's the flex plate but they're not too bad. Don't forget a fresh transmission tailshaft seal and to inspect the U-joints and rubber mounts all around (I'd replace the trans mount while you've backed it off).

The 300 is Fords most durable engine also used in industry, flightline aircraft tugs and much more.

Inspect the brakes and if you ever pull a caliper (or live where there's winter) put some nickel (not the watery auto store SPermatex shit) anti-seize on the sliding surfaces. The right side gets wetter (being nearest the curb) and sticks first.

https://www.ford-trucks.com/forums/index.php is a goldmine with many pro mechanics.
>>
File: 20210606_200442.jpg (832 KB, 2584x1723)
832 KB
832 KB JPG
I finally found a shell that fits my truck on craigslist. I previously had one that came off a mid 90s model so it never fit quite right. Only problem was that it was silver and it looked shitty with the white paint so I sanded it down and spray painted it on Sunday. The next project will be making a raised platform across the wheel wells so that I can tie down the kayak underneath and keep my camping gear dry on top.
>>
Why would you buy a truck when you could just have a cool sports car and attach a trailer to it? You get a cool car to pick up chicks in and you can carry things with the trailer unless you’re buying RV’s but I feel like that’s something only boomers do. I only need a bed for taking stuff to the dumb or buying lumber, gravel, washing machines, cabinets etc for house projects.
>>
>>24181846
I confess I have used my v6 charger to move more stuff with a trailer then my R/T.
>>
finally got my first truck
got a 2018 Tacoma TRD Off-Road 4x4
I fucking love it
>>
>>24181846
based.
>>
>>24181846
But I have both
>>
>>24181846
I wouldn't consider my charger a sports car but it is the rally edition v6 charger with 315hp. Top end it moves really good with the 8 gear transmission.

It shits on my R/T in the top top end.

The 500hp crate motor will solve the problem. Plus 150hp of nitrious and slicks we are going places.
>>
File: 20210607_200808.jpg (2.43 MB, 1869x2240)
2.43 MB
2.43 MB JPG
>>24182097
Forgot picture.
>>
>>24181846
Car towing a trailer will always look cooler than a pick up truck.
>>
>>24182133
2014 with 40,000 miles, pop's gave to me for free when he got his fancy Trailhawk Jeep. Based pop's
>>
File: 20200424_123506.jpg (3.77 MB, 3275x2735)
3.77 MB
3.77 MB JPG
>>24181846
>adding any weight to my pig550
>not just owning both
I don't think so Tim
>>
>>24182214
based suburban cruiser
>>
File: 20210605_191728.jpg (2.84 MB, 1535x3628)
2.84 MB
2.84 MB JPG
I am suffering. Another 3-4 weeks to get the 408 crate motor. New motor in then reroute the nitrous lines to work with the plate.

The wait sucks.
>>
>>24182231
I am not going to lie it is a really nice car.
>>
>>24182285
I remember you posting this thing, it's a nice trugg anon
>>
File: 20210605_100932.jpg (2.49 MB, 4032x1960)
2.49 MB
2.49 MB JPG
>>24182302
Thanks man it is a work in progress. I wont rest until I run a 10's quarter.
>>
After having tow mirrors I cannot go back to having regular mirrors, even if I'm not towing, especially if they have power folding.
>>
File deleted.
All my truckbros are cool. Don't show up to work tomorrow.
>>
File: 20210607_220456.jpg (2.47 MB, 1361x2974)
2.47 MB
2.47 MB JPG
>>24182532
>>
Very sentimental to me working on pic related. This is my Pops old 3/4 ton Chevy. Left in kind of bad shape mostly because he had been battling for Parkinson’s for the last decade of his life. Today was the first time it had got it out on the road in 6-7 years. Feels good man.
>>
>>24182907
Needlessly based anon
>>
is a 93 hilux surf welcome in these? Never thought I'd see one here in the states, bought it off some local dude who imported it for use as a mail truck lol. 92k miles, things damn near pristine. Has less rust than my 2012 FJ I had before lol
>>
File: 20210403_221213.jpg (3.56 MB, 4032x3024)
3.56 MB
3.56 MB JPG
My 7.tree powerchoke. $1000.
1997 F250 HD ext. Cab Long bed 4x4 auto E4OD.
>>
>>24182907
what a beauty, take care of her anon. what motor does she have?
>>
>>24183185
now how in the hell did you get a seven tree for $1k anon (beautiful truck im jealous)
>>
>>24183272
it was a sore dick deal, my friends girlfriends dad was gettin rid of it. it's pretty rusty, it needed a steering box and an alternator and a few other minor things.

I have put 6k miles on it trouble free since March when I bought her. Her name is Greta because i'm sure greta thunburg would love the fact that I am driving a pre emissions diesel with no egr etc.
>>
>Have 91 W250 with Dana 70.
>Keeps grabbing when I make left turns.
>Right turns fine.
>Have added more LSD friction modifier to it twice now.
>No change.
>Also randomly clicks and pops.

wat do?
>>
>>24183339
Drain and fill the diff fluid again. Had a bad lsd in an old gmc that did the same shit, would also bind up on turns. Changing the oil again some time after the first oil change had the rear and working as it should.
>>
>>24183351
Thanks
>>
>>24183284
exceedingly based anon, take care of Greta and she’ll last you forever
>>
>>24183193
She has the big block 454 which is extremely cool (Poppy liked to go go in his younger days), but it still needs quite a bit of work. Slowly saving to put a new exhaust kit on it and open to suggestions. Also could use belts hoses and a deep cleaning under the hood. Pic related is one I took about 2 months ago before I really started doing anything to it. Pardon my shit photos.
>>
>>24181846
a sports car with a trailer hitch is haram af
>>
>>24183284
H-how dare you!
>>
File: bay.jpg (929 KB, 2592x1944)
929 KB
929 KB JPG
OP here, thanks for the pleasant comments. Cleaned up the bay a little - the gentleman who owned this before me took great care of it, outside of the odd electrical work. Ordered a new starter, solenoid, top/bottom hoses for the radiator, valve cover gasket and serpentine. I'll pull the old starter to check the drive and flexplate today.
>>
>>24184362
With a bit of spit and degreaser, that'll clean up nicely. Best of luck with the truck.
>>
>>24181738
My father thinks the same thing about the plate, appreciate the input and tips. Bookmark'd the forum, seems like I'll be frequenting it often.
>>
>>24184362
very cool, the venerable 454. i can only imagine the fuel consumption
>>
>>24183170
its a cool truck but my main point of paranoia would be the fact that you need to open the rear window to open the trunk. I'd imagine the window motor shitting the bed and then you can't open the trunk from the outside anymore which would be a pain.
>>
File: FB_IMG_1572310088040.jpg (140 KB, 1079x720)
140 KB
140 KB JPG
>>24184362
454 is a good motor, pretty reliable and can make a decent amount of power if you feel the itch.

Pop's and I rebuilt one block up for a mud truck we were working on. Ran flawless till we sold it.
>>
>>24183170
Is there any difference from a 4Runner other than being RHD??
>>
>>24184995
Noted!
>>24186163
Thank God for my Corolla, I would go fucking broke otherwise.
>>24187568
Mine is only 2wd so no mud pits for me, but looks like a hell of a lot of fun!
>>
File: 1578252055023.gif (9 KB, 220x124)
9 KB
9 KB GIF
>>24177070
great truck. ya did good op.
>>
File: 20210529_145452.jpg (2.27 MB, 3078x3023)
2.27 MB
2.27 MB JPG
02 chev 1500 5.3 good truck needs work from time to time never left me stranded anyone else have a gmt 800 truck how do you like it?
>>
>>24184989
Damn I wish my 300 looked like that. mine was a part hauler for a teamster company. low wear on the engine but the body, power steering, shocks, and brakes were all shot from being overloaded.
>>
File: PXL_20210502_212240705.jpg (387 KB, 1280x960)
387 KB
387 KB JPG
Haven't had as much time to work on it as I'd hoped, but nearly every part's in and I'm almost ready to start welding the floors. Not exactly a barn find but getting a free truck from a 100 year old dude is cool enough.
>>
I own a truck similar to pic related, though this isnt mine exactly. Its a 2015 F150 2.7l 2WD and i love my truck so much. I bought it a year ago Certified PreOwned with 44k miles. Ive done so much to it, installed Katzkin leather, new speakers and amp, spray-in bed liner, moromoto xB headlights, 2” level with 32” BFG K02’s. Next week, im getting a truetrac installed and regearing from 3.31 to 3.73 gears. My truck is my baby and it never gets tiring to drive
>>
>>24177437
beauty
>>
>>24189419
Nice pickup - the guy likely just wants it taken care of. There's a '72 GMC short bed down the street that belonged to a guy who passed away. His father is keeping it in a bay and every time I drive by it, I rubberneck to look. Needs to be cared for, but I get the hesitancy to hold onto it for sentimental reasons.
>>24189317
This truck was super clean for the price, cannot believe how I was able to snag it. It sounds like everything else goes before the 300.
>>
Wasn't working for 6 months and wasn't spending wisely. Lost my 2017 Silverado. I'm saving up for something a little older. I miss having an older cheaper truck you don't have to worry about keeping nice kek. It's also really nice not making payments on a vehicle monthly for the first time in awhile. My dad has a first gen ram single cab I could basically have if I can get it running, just sat a long time. I'm driving my brother little Integra until I save a bit, but it's almost too small for me, I have to like crawl into it. I miss being able to put my dirt bike or haul the camper too. I don't wrench so I dunno where to start I guess so if Its carberated or what. There's also an 05 ram there just sitting in the garage but it was grandpa's for years and I think my uncle drives it sometimes, I think my littler cousin was picking rocks out of fields this summer with and it looks like he fucked it right about. Fenders for the box have dents everyfuckin where now. I swear 5 months ago there was no dents at all. Either that or my uncle just stopped giving a fuck about it.
>>
>>24190654
>he doesn't wrench
Now's the time, anon. Why not ask your dad for help getting the 1st gen started?
>>
File: smoltrugg.jpg (2.76 MB, 3648x2736)
2.76 MB
2.76 MB JPG
My '94 S10 that I bought last September. 4.3L auto rwd.

>Most recent repair
Had broken (original) engine mounts, oil pan was sitting on crossmember, rad fan rubbing on the lower shroud. Replaced all mounts with Energy Suspension polyurethane. Replaced leaky rad, lower and top hoses, thermostat. Plugs, wires, cap and rotor got rid of nasty miss and got it firing on all 6 again. New tailgate cables, new fuel door spring (no more flapping in the wind). New brake pads. New temp sender. New driver door switch. New EGR valve, old one had flaky solenoid. Fixed a burnt trace on the wiper control module PCB. New tires. Fixed an exhaust leak. Fixed the hazards. Next will do poly body mounts. Thank god for Rockauto.

>Most common thing you haul
Trash, garden supplies, furniture, firewood.

>Thing you love most about your truck
Small enough to fit my driveway, reasonable bed size, can theoretically sit 5 people. OEM parts are cheap, lots of aftermarket upgrades available.

>Thing you hate most about your truck
Interior build """"quality"""" is laughingly bad.
>>
>>24187579
2.4L turbadissel, a few more electronic gizmos like adjustable suspension
>>
>>24182907
I spent last weekend clearing out my dad's garage after brain cancer finally got em. Took more than my share of sentimental momentos. Good on you for keeping it on the road. Hope it stays there for another 30 years.
>>
File: hugging pepe.jpg (7 KB, 271x186)
7 KB
7 KB JPG
Just finished reading every post on this thread, and have decided this (along with the twingo and sometimes miata) threads are the only ones that actually embrace the enthusiast angle of the board. No one shitting on other peoples trucks, positive reinforcement, nostalgia about vehicles owned by previous family members. Keep it up anons.
>>
>>24177070
Nice truck!

My 2002 Silverado 1500 was just totaled so need a new truck this week. I’m stuck between a 2001 Ford F-250 7.3l or another GMT800 5.3. I really like the F-250s but have never owned a diesel.
>>
File: PXL_20210425_231806780.jpg (315 KB, 1280x960)
315 KB
315 KB JPG
>>24190636
>Nice pickup - the guy likely just wants it taken care of.

Yeah, it's a funny story. The guy lives a few blocks away and is a client of mine. I was working at his place over the winter and making smalltalk, just asked him what that old truck was I used to see in his driveway. He says "I still have it, do you want to buy it?" I told him I wasn't looking to buy a truck. Then he says "I'll give it to you." Told him I wasn't really looking for another project, and he comes back with "We'll make it happen." So I was ordered to take it.

He basically liked the fact I wasn't a tard and respected old stuff, plus he wanted to keep it in the neighborhood. He bought it new at a dealership that no longer exists, where a Starbucks is now in the middle of a residential neighborhood. His family owns/owned a lot of property around here and needed a plow/brush truck for a handyman they used to hire full-time. Supposedly it's never really been out of town and it has 32K original miles. I can trace it accurately as far back as about 1998 and it's only been driven 1000mi since then.

1977 F150 Custom 4x4 shortbed, 300 i6, 4sp. Back in the day trucks shipped without bumpers and you'd choose a factory or aftermarket one from the dealer you bought it from. This guy apparently didn't fall for the bumper jew and it spent 44 years being backed into stuff. I found a nice original sport bumper so it has one for the first time mow.
>>
Picking up a 85 f250 with the 460 later today. Using it for my farm. Can't wait to mod it a little.
>>
>>24191067
>This guy apparently didn't fall for the bumper jew and it spent 44 years being backed into stuff.
kek - it's just another kind of patina
>>
>>24190849
All I see when I see S10s is a missile waiting to be constructed. LS swap or small block stroker for wrap-me-around-a-telephone-pole speeds. Fun trucks. Shit interior, as stated. Nice vehicle.
>>
File: IMG_20210503_114232.jpg (348 KB, 1156x867)
348 KB
348 KB JPG
Here's my Chevy that I've been working on for some time. I have a professional working on the tranny now since it needs to be capable of handling 550+ HP and a potential blower.
>>
>>24191171
Thanks. I can very well see it become a project in the future. As of now my short-term goal is to upgrade all the degraded rubber with poly counterparts. Eventually a new windscreen, this one has a big crack in it. Other than that it doesn't leak any fluid, doesn't burn any oil. 4L60E trans has been rebuilt a couple of years ago, spider injection has ~15,000 miles on it. I plan to own this one for a long time.
>>
>father in law has a mint condition 71 Silverado
>And a too trim 16 Silverado with a ton of custom work
>Both stay spotless and haven't left his garage in two and a half years
I get it to keep them in nice condition, but he drives his fucking work van everywhere. He has had the 71 since my wife was a kid, I guess he won't even take it out if there's a cloud. I started calling them mall crawlers and it bugs the hell out of him kek. At least mall crawlers leave the garage.
>>
>>24190636
Oh yeah as long as something that resembles oil is in the engine and you dont rev it to 6k rpm then itll be fine. Its all the shit Ford parts like the power steering that you gotta stay on top of. Wish i could delete all that crap.
>>
>>24191184
nice what year is this?
>>
>>24190898
I've got a 99 250 with a 7.3, she's been decent to me, no issues with the engine aside from the dipstick tube thing but I fixed that, and other stuff on the 7.3 isn't too bad to work on at home. Everything else has just been suspension and steering work because none of it has been done in the life of the truck it seems.
>>
File: FB_IMG_1572309489298.jpg (144 KB, 1080x728)
144 KB
144 KB JPG
>>24189045
Yeah it was a blast. Good luck with your truck anon.
>>
File: honda-ridgeline.jpg (154 KB, 1920x1080)
154 KB
154 KB JPG
>>24190895
All truck frens are ok by me, I may not like ram at all but a truck is still a truck

Only "trucks" that deserved to get bullied are honda ridgelines
>>
File: 20210609_184130.jpg (2.58 MB, 1667x2709)
2.58 MB
2.58 MB JPG
>>24191067
That is a cool story anon, glad you got such a great deal. Hope you get a lot of enjoyment out of that truck.
>>
>>24192627
Thats what I hear, my old boss has a 92 7.3 that he loves, so I have been talking to him about it too
>>
Years ago my wife basically forced( set up an entire sale behind my back ) me to sell my 95 f150 XLT. It had 4x4, AC, heat, started and ran perfect, interior was good condition, it just had rust and faded paint. Got it for an insane deal of 1500 cdn from family, fresh 5.7L I think dropped in by my father. Where I am it'd sell for nearly 3k with the right buyer. No my wife sold it for the same 1500 I got it for a month earlier. You could tell even my dad was crushed. He did an engine swap over a weekend cause he knew I loved the truck. And then I just had a shittier vehicle cause 1500 cdn gets you nothing anymore. Back when I was 16 you could find am abused prelude or something, and you would fucking adore it. Now it seems like the same shit boxes that were 1500 in like 2002 are still selling for 1500. I once had a boss say if you find a running car for 1k you did good, shiit, I've bought 240sx, civic hatchbacks for that price, that are triple the price 10 years later, I don't know if its just here. It's like the stereotypical high school kid cars haven't changed in 12 years or whatever, but now they cost even more? Why cause they are rarer? I had a mint 240sx I got for 2k, now my dad can't find a non running one for 2k and he'll he'd pay it. Besides the very few people are importing, rwd jap cars have gone extinct. Maybe it was degenerate generation of river/stoners. I know I totalled some nice old Jap cars being a stoned fuckin idiot.
Kek, my buddy got a 2001 Celica when he turned 16, and he was the shit. One of the poor kids but somehow is Polak parents bought him this 9k Celica that was ridiculously riced out, even those Sid decals and shit. Mfer got so stoned he imagined a cat and crashed into the ditch
Then the genius ran 10 blocks, and reported it stolen. Cop instantly caught him in a lie but didn't get any charges somehow lucky bastard. He literally had to right a judge an apology for his behavior.
>>
File: 20210609_192207.jpg (2.2 MB, 2404x1907)
2.2 MB
2.2 MB JPG
>>24190895
DakotaRT anon here. Truck general has been a really comfy space to share your truck. Even helped me figure out how to post pictures that were not sideways.

Thanks to all the anons that share their rides. Seen some cool stuff posted here.
>>
>>24193283
Schizoposting
>>
>>24193283
Holy fuck dude learn what a paragraph is.
>>
>>24193283
is this some copypasta or what
>>
File: Resized_20200528_111200.jpg (3.49 MB, 2560x1440)
3.49 MB
3.49 MB JPG
95 F150 XL It's got the i6 and a five speed and that's it. It was my dad's until he couldn't use the clutch anymore. I've been upgrading small bits here and there, mostly cosmetic. I'm swapping out the rear painted bumper with a chrome one so they match. I just need to get an impact wrench to get the old one off first.

We were only using it to pull the boat or getting out to the woods for a hunt but I'm using it for a daily driver now. It's too nice to let sit.
>>
File: 20210602_143918.jpg (3.75 MB, 4032x3024)
3.75 MB
3.75 MB JPG
Great buy op those 300 i6s are indestructable.
I bought this barely 2 months ago for less than 3 grand and its got zero rust, so far have given it new bilstein shocks, all new power steering, tie rods, ball joints, steering gear box from redhead, and soon plan to get the rear tank working and fixing the gauge. If anybody has a pdf manual for this gen ford truck that would save a lot of head aches.
92 F150 with 4x4, 302 v8 and 4 speed auto
>>
File: 20210604_154757.jpg (2.93 MB, 4032x3024)
2.93 MB
2.93 MB JPG
heres a pic of some of the work ive put into it so far. the transmission pan had a nasty leak that I fixed by taking it off, cleaning the surfaces and giving it a new rubber gasket and some rtv. gave me a good chance to get in there and make sure the fluid was good too. Sadly the previous owners left her to leak for many years so a lot of the under body around the transmission and engine is nasty. Power steering used to leak really bad too so that side underneath the car is nasty. thankfully all thats taken care now. Having good friends who let you use their driveway, share tools and offer help are a blessing to have.
>>
>>24195354
Looks good man, one of my favorite looking trucks, yet I can never get anyone to agree. I had a 95. I had no idea til recently but I guess my dad bought a 1990 f150 XLT single cab brand new, and then a month later my mom got knocked up and he traded it in for a van or some actually I think it was a sand coloured 1st gen Chrysler minivan and they drove that for like 20 fuckin years.
>>
I wish where I lived it wasn't basically required for you to drive a truck. The used truck market here is sickening, anything under 10k is really really on its last legs. They'll have half a million kms, bald tires and a ton of rust. But ask 10k cause it's a truck with 4x4. And I'm in the market. Think I need to find a fixer upper to get a deal.
>>
File: 20210608_000507.jpg (2.16 MB, 4032x3024)
2.16 MB
2.16 MB JPG
>>24195367
thanks anon, im proud of it being my first truck though it isnt much. part of me wants a heavier duty version of the truck with a 7.3 diesel or something but I also know I dont need the extra expenses for what I'll be using my truck for. the obs fords are kino for utility and offroading, they look great and much better than the chevys of the same time period if you ask me
>>
>>24195354
now this is what I call a trugg! nice rig anon
>>
>>24194968
there's just a certain honesty or earnestness about this truck, hit it with some wax tho anon
>>
>>24183185
holy based
>>
>>24179240
Responding and adding to my own post. I bought this pickup with the intention of it being a beater for 2-3 years until the used market pulled its head out of it's ass and came back to normal. But the more I drive it, the more I like it and see that this something worth keeping in good condition. What are some preventative maintenance steps I can take to keep it running good and maybe run even better?
>>
File: 51118.jpg (27 KB, 800x800)
27 KB
27 KB JPG
>>24197636
I remember you! Glad the truck is working out for ya.
If you live in or near the rust belt clean and coat the frame. as best you can. If you haven't flushed all the fluids yet, obviously that's a no brainer. Other than that, just drive it and fix things as they come up.
If you have access to a compressor (60 gal minimum probably) buy a pic related gun and spray in your own bedliner. It will take you 1 afternoon and be 1/10 the cost.
>>
>>24197636
since yours is starting to get up there in mileage, think about when the last time your water pump and timing has been done (if it all)
those are some of the biggest things to consider in trucks that are getting old as far as a healthy engine is concerned. but since its one of the bigger jobs if you want to keep the truck long term it may also be worth while to take the heads off and clean them up, doing valvetrain etc if not giving the engine new heads. Also an opportunity to make more power without going crazy.
>>
>>24192595
'91 C1500
>>
File: running-boards-off.jpg (1.67 MB, 2592x1944)
1.67 MB
1.67 MB JPG
Running boards are off to get cleaned and refurbished. Old starter is the culprit for the no-start - the bendix is trashed. Flex plate is in great shape comparatively. Should fire right up once replaced - can't wait to tootle around town and find more small issues to fix.
>>
File: 20210610_191044.jpg (1.89 MB, 1816x1936)
1.89 MB
1.89 MB JPG
>>24197675
Not him but in respect to bedliners I went with the herculiner option. No compressor need just roll it on.

Sanded to rough it up and get the heavy mildew off. Clean with acetone and primer any bare metal surfaces. Rolled on the first coat then did the second coat the next day. Rolling the first coat was a bitch though so spraying might be easier but there are other options.
>>
>garage
5th gen Ranger
>repair
Nothing yet
>haul
1994 Tidecraft Fish and Ski that I spent last summer restoring.
> love most
Velocity blue paint and the ride (not that special compared to the other new trucks I test drove but compared to my 98 Dakota before it it's heaven)
>hate most
The window buttons were put in a retarded position that's hard to reach my hand back to.
>Wheel and tire
DESU not really something I care about, its currently 17/30 and that seems good enough. I'll probably eventually go down on wheels while keeping the same tire diameter for more sidewall though.

No pic because I've posted all the ones I have on normie social media.
>>
>>24199235
Guess I should specify, XLT, 4x4, Supercab. Also forgot that word filter existed since I hardly ever use that phrase.
>>
STARTER CAME IN
THE FERD LIVES TOMORROW
I'm pretty excited
>>
>>24197675
>>24198810
That doesn't look half bad, how does it hold up? I've seen a lot of liners that start fading after just a few months.
>>24197979
I was actually thinking about changing the water pump just because I've had one go bad before on a completely different vehicle.

I've never messed around with an engine before so doing things like heads and valves is pretty intimating.
>>
>>24199313
Cool! I need to do something about mine, it sometimes fails to engage and goes WIZZZZZ at random. On the worst days it can take more than five tries before I can get it going. Shit's embarassing.
>>
File: 2-1593010551274.jpg (78 KB, 832x468)
78 KB
78 KB JPG
>>24177070
>parked perfectly in my driveway, and promptly wouldn't start again.

Once had a 92 f150 with the sexy nite appearance package, and for 4 years it would randomly do this no start after parking shit even after replacing virtually every part involved and stumping 3 mechanics. It ended up being the valve that switches tanks when you hit the switch (when it fails it will do this whenever it feels like it) leaving you in a parking lot punching the dash. If you have dual tanks check there first.
>>
>>24182907
>mfw made me remember gramps and his green 1975 k30 that we all called Slimer
>>
>>24177070
>>What's in your garage
>>Most recent repair
>>Most common thing you haul
>>Thing you love most about your truck
>>Thing you hate most about your truck
>>Your ideal wheel and tire size

>2000 Tundra
>Tailgate wouldn't open. added new clips.
>Tools and trash
>Legroom
>Turning radius
>Standard 16" tires. Lifting trucks is mostly for hobbyists
>>
>>24199459
Thanks for the tip, m8. Luckily - and I mean it - I only have one tank. I've found myself already slightly overwhelmed by the massive vacuum system in the Ford, and I know that any additional variables lead to (sometimes) unnecessary complexity. I pulled the starter today and the bendix is beyond its years. New one is in, it will rip tomorrow. Beautiful truck.
>>
File: IROCz(1)(1).png (380 KB, 499x313)
380 KB
380 KB PNG
>What's in your garage
04 grand prix gtp, 07 GMC canyon 4banger, 97 KX125 thts beat to shit, 18 Bass tracker 175, tons of building materials I've been hoarding
>Most recent repair
Had to splice the abs wire on a wheel bearing i did last month since the dust guard was in such shit shape it slowly sliced through it on hard corners

>Most common thing you haul
recently my 16' trailer and bed loaded with freebies from the job site/shop

>Thing you love most about your truck
it was super cheap being a fleet vehicle from a paint shop, semi decent mpgs

>Thing you hate most about your truck
The 2.9 I4 is a fucking dog, it struggles to pull my 17 foot aluminum boat out of the water on almost level ground. Also the dashboard will randomly have a stroke sending all the lights/gages into twerk city

>Your ideal wheel and tire size
lol what idgaf
>>
File: 20210610_170119.jpg (2.14 MB, 3346x2907)
2.14 MB
2.14 MB JPG
5.3 swap update spam
>>
File: 20210610_225647.jpg (2.12 MB, 3820x2762)
2.12 MB
2.12 MB JPG
>>24200712
The fabbot adapter plate for the ar5 worked nicely, looks like it's roughly the same length as the t5 I'm taking out.
>>
File: 20210610_152134.jpg (3.17 MB, 4032x3024)
3.17 MB
3.17 MB JPG
>>24200720
Didn't break any exhaust studs, ebay headers have plenty of clearance for the new wires, will wrap the headers and jacket the wires anyhow.
>>
>>24200727
>>24200720
>>24200712
Nice work anon. Exciting to be in the middle of a swap.



Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.