[a / b / c / d / e / f / g / gif / h / hr / k / m / o / p / r / s / t / u / v / vg / vm / vmg / vr / vrpg / vst / w / wg] [i / ic] [r9k / s4s / vip / qa] [cm / hm / lgbt / y] [3 / aco / adv / an / bant / biz / cgl / ck / co / diy / fa / fit / gd / hc / his / int / jp / lit / mlp / mu / n / news / out / po / pol / pw / qst / sci / soc / sp / tg / toy / trv / tv / vp / vt / wsg / wsr / x / xs] [Settings] [Search] [Mobile] [Home]
Board
Settings Mobile Home
/k/ - Weapons

[Advertise on 4chan]


Thread archived.
You cannot reply anymore.


[Advertise on 4chan]


File: apu fal V2.png (308 KB, 711x762)
308 KB
308 KB PNG
uncomfy times need comfy men

Welcome all new members, provisional BR frens are reminded to lurk and observe proper post and floor decorum before spouting off like a nonce.
Post your BR loadouts and get helpful tips. TACOs do work for our mags.
Discuss the history of the Garand and it's children. Even the illegitimate Italian bastard.
It doesn't count unless you used ballistic-x and post groups.
The SIG MCX SPEAR has been given a temporary posting pass while it's fate is reviewed by the council.
If you stand real still you might catch a glimpse of the rare stripped Galil receiver up in the trees.
Tips on reloading steel case berdan; the dark winter is not over for some anon ammo aficionados.
Remembering $45 green wide handguards and 25¢ G3 mags. A cautionary tale of procrastination.
PTR and DSA are fine products, fear not as they both have great warranties in the unlikely case there is a problem*. *warning warrenty NOT valid if you are too autistic to make a phone call to ask for your free replacement. Standard spaghetti rates apply.
Post your spring collection glamour shots.
German camo autism.
/brg/ flex board still hasn't been shaken up recently. Barrett AR10 still unclaimed on the owners wheel.

No trannies, no jannies, no furries, no Spokane, no SKSs, full power AKs OK
This is nice thread. Be nice. This is a threat.

Prev >>53448944
>>
File: GayRetard.jpg (315 KB, 1420x666)
315 KB
315 KB JPG
It's hot today, hope my fellow sweaty bros are enjoying a refreshing beverage.
>>
>>53544984
I'm drinking a cabernet sauvignon in the morning because the semester just ended
next I will go change the oil on my car
>I really need to go shooting

If I mounted a GoPro on my FAL and took video, would y'all wanna watch it?
>>
File: Wood.jpg (1.63 MB, 3024x3289)
1.63 MB
1.63 MB JPG
A note to any new BM-59 friends. Buy a garand adjustable gas plug and enjoy the softest shooting BR you can get
>>
>>53544830
We have a thread number in the OP again fuck yeah, also new update on the lubedeal.

UPDATE UPDATE:
>Lubeanon talked to the SAR boss, got the OK for SAR exports, other BR triggers seem to be a possibility in the future as well. Big boss got some lube to smooth things over.
>>>NEW<<< SAR boss really liked the lube, lube anon is considering getting a gun dealer license to make things easier
>2023 will he the year of classic BR match triggers for /brg/


Reminder that SAR G3s will get you
>sub 1 MOA
http://www.sar-shop.de/epages/61028398.sf/de_DE/?ObjectPath=/Shops/61028398/Products/41.331
>sub 0.5 in the DMR version
http://www.sar-shop.de/epages/61028398.sf/de_DE/?ObjectPath=/Shops/61028398/Products/41.373
>5 years guarantee
>2 free check-ups
>officially certified German master artisan (yes that's a thing) crafted weaponry
>literally produced just 15 minutes away from the HK HQ
>peerless reliability
>peerless quality
>a gun that never even came CLOSE to grubby mediterranean hands
>break in period? Are you gay? (/akg/ welcomes you)
>trigger? Not shit!
>the highest quality barrel
>Barrel, you ask? Polygonal rifling (none of that cheap L&G PTR shit) coldforged and stress free annealed in a vacuum by Lothar Walther (rip)
>national marksman competition winning accuracy
Don't want an old school battle rifle?
How about something newer than the SCAR for only 3k?
>the HK417 (aka MR308 in the civilian version, HK original, so feel free to post better deals or deals in your region) is also available at SAR
>precision, reliability, operator level gear and the ability to dunk on SCARfags*
All that and more, only at SAR with worldwide shipping.**
Buy SAR, buy quality.***

*pls no spergerino SCARfrens we still love you
**American import restrictions apply, blame your local governor/president
***currently out of stock due to christmas sales and SARnon snagging up one of the last
>>
File: SAR M41 (G3) Matchtrigger.jpg (947 KB, 1532x1922)
947 KB
947 KB JPG
>>53545089
Lubeanon, widely renowned for providing the best lube around for /k/commandos by far, stepped up and offered to just proxybuy and ship them, he was offered an extra cut for his services but refused and preferred to do it for free. Buy some of his lube if you need a refill though.

Already got a PTR or intend to get one soon?
Want SAR quality for your G3 clone but live under a tyrannical government that colludes with your gun lobby to restrict imports in any way possible?
How about a high quality 1900g pull weight G3 match trigger for 400 bucks?
>You're gonna have to overcome your autism and call them though since delivery depends a lot on where you are in the US, import review and guide pending once triggeranon tells of his experience.
http://www.sar-shop.de/epages/61028398.sf/de_DE/?ObjectPath=/Shops/61028398/Products/41.1013
>not a refurbished old G3 trigger, actually a fresh product from their own production
>all new parts, nothing recycled
>long development to ensure quality that matches the rest of the M41 (SAR G3 clone)
>triggerstop customizable to your taste
>crisp break
>completely SAR made from start to finish
>high production quality, top quality surface treatment, finely CNC'd
>improved spring
>production via the highly accurate machines of SAR (it doesn't say whether machines refers to the actual machines or Germans here)
>Black Rheinmetall finish over a corundum blazed surface (wow!)
>No flimsy plastic
>large precision increase if you have any idea how to shoot

Get fucked HK Parts
>>
>>53545054
I'd watch it. I'm enjoying a dunkin donuts iced coffee, and need to go to the garage and restore the 12 romanian AK bayonets I have sitting in a bucket.
>>
>>53545108
will it work in an MP5 though?
how the fuck do you buy these triggers?
>>
File: 20161203_121502.jpg (2.33 MB, 2560x1536)
2.33 MB
2.33 MB JPG
>>53545054
>br porno
>y'all wanna watch it?
Yes.
>>
>>53545174
>will it work in an MP5 though?
The MP5 has its own trigger. Works in SAR's MP5 clone, in HK MP5's and should work in pretty much every other MP5 version as well. Except for the H&K SP5, that one seems to be a bit special.
http://www.sar-shop.de/epages/61028398.sf/de_DE/?ObjectPath=/Shops/61028398/Products/41.1014
>how the fuck do you buy these triggers?
Lube-anon is working on it, give it until about next year.
>>
>>53545174
>Lube-anon is working on it, give it until about next year.
(If you're an American.)
If you live literally anywhere else you can get it shipped to you as long as your local lawman is down with it. They used to ship to America as well and for their items that aren't very popular and quickly out of stock they probably still do, but those that'll get sold anyway just aren't really worth the hassle to fuck around with the American authorities.
Lube-anon doesn't mind though.
>>
>>53545174
>will it work in an MP5 though?
I checked that for you. They sell something called SAR M41/05, its for MP5 and clones like "BT96,MKE T94". Its 4lbs with adjustable trigger stop, own production product. They also said that its possible to adjust the trigger when its not able to fit in a clone, this also means I need a checklist for the individual clones before doing anything
>>
File: 20220512_202119.jpg (830 KB, 4032x1116)
830 KB
830 KB JPG
Here's my PTR 91 GI after I put a A3 stock, black grip and wide handguard on it. Been having a lot of fun shooting it since I got it a few weeks ago.

I got a bayonet lug for it but I'm still waiting for my bayonet for it to show up from Latvia.
>>
>>53545531
>Lube-anon doesn't mind though.
Thats correct, our website should alow a company like SAR to ignore problems and even do custom jobs. Everything fine and all I have to do is blocking non-rational price increase and maybe doing some price war to compensate for export fees. For example, the SARm41 cost 448€ which inclueds 19% german fee. This fee getting excluded if I buy it with the NAC INC so its 376€ when I buy it, now add some possible price production when ordering 50 triggers ...
>>
>>53545729
At that point it might be worth buying it through you even as a German lmao
>>
>>53544830
Is the SKS an battle rifle?
>>
>>53545841
No, 7.62x39 is an intermediate caliber. Battle rifles use a full power rifle round.
>>
File: Capture4.png (213 KB, 620x500)
213 KB
213 KB PNG
>>53545695
That ribbed handguard make the candlewax come out.
>>
>>53545841
Yes because you can battle with it
>>
>>53546080
By that logic, wouldn't a nerf gun be a battle rifle?
>>
>>53546412
Correct.
>>
>>53545695
Ah, a make over. I love it! Wtf with Latvian bayo?
>>
>>53546817
It's actually a Swedish AK4 bayonet but the place I bought it from is in Latvia
>>
How many battle rifle threads do we need?

Fal > g3

M14 sucks but it looks cool

Scar 17 is currently the best battle rifle available

End thread
>>
>>53546080
I'm sorry king, I thought you were going to have the most retarded take in this thread, but then this guy shows up
>>53547426
>>
File: gun.png (787 KB, 789x499)
787 KB
787 KB PNG
>>53545065
Do you have any tips other than that? i just got a tanker bm59 and i dont know too much, i just cleaned a bunch of copper fouling out of it and im shooting it sunday
>>
>>53545065
Nice Johnson, anon
>>
File: 20210318_190314.jpg (2.86 MB, 4128x3096)
2.86 MB
2.86 MB JPG
>>53547376
>Swedish AK4
And this mounts to x91? Nice to know.
>>
>>53547745
I never used to be suprised at the limited pespective, much less low intelligence, of people on the internet. ...but then I found /k/.
>>
>>53547795
I love your rifle so much. It's the most interesting new addition to /brg/ lately!
>>
>>53548315
Thank you! i really like it alot too. I only started buying guns last year, this is my fifth and final for the time being since im poor. My Other guns include a mossberg 12 gauge, a rock island .45 1911, a snubnosed .38 special, and an AR-15
>>
>>53548512
A nice basic foundation. This will hopefully leand your tastes to the more serious side. Plan 1 per quarter, or half year if you can't budget 1/Q.
>>
>>53544830
>If you stand real still you might catch a glimpse of the rare stripped Galil receiver up in the trees.
Glad someone still remembers me jej. I have good news and bad news. Good news is I have all the money/tooling I need set aside for basically finishing the entire galil project. Bad news is Everybody I know who makes 308 galil barrels arent taking orders right now. Im messaging around and seeing who I can work with but for now Im basically at the whim of whenever one of them feels like taking work again. My homeslice who also built a 308 galil (Hes the one with the custom galil dong on plebbit if youve ever seen it) has been steadily helping me out and bullying me into getting my galil finished since he completely finished his, parked, engraved and everything.
TLDR: Right as I start getting time freed up in my schedule Im not able to order the barrel to actually finish my project. Such is life I guess.
On the bright side my buddy found a company that does repros of 308 galil mags that he prefers over actual IMI mags.
If anyone has any questions or wants a link to the (now somewhat outdated) galil pastebin, either ask away or email me at Galilfag@protonmail.com
>>
File: 20220513_182940.jpg (1.37 MB, 1814x2419)
1.37 MB
1.37 MB JPG
>>53547795
Clean and lube and it should be a great time shooting. I think stock they prefer 150gr bullets iirc. Looking more closely at your bayonet lug, idk if a M7 bayonet will work
>>
>>53550271
Yeah not gonna lie i think it just takes a garand bayonet desu
>>
File: 20220513_184022.jpg (778 KB, 1814x2419)
778 KB
778 KB JPG
>>53550323
I'm bored so I did some measuring. The diameter of your gas cylinder that the bayonet will go around needs to be less than 0.625" to use a garand bayonet. If larger, m7 bayo for you
>>
>>53547426
I refuse to believe this isn't a troll because if it isn't then this board truly is completely overrun with tourists
>>
File: 20220513_190551.jpg (1.62 MB, 1816x3973)
1.62 MB
1.62 MB JPG
>>53548144
Thanks! She's a woefully under appreciated battle rifle, especially compared to her contemporaries.
>>
>>53550271
Man, that's a sweet pair!
>>
>>53550853
fuck i am jealous
>>
>>5355095
Not to fuel your jealousy, but it is a very nice rifle. Handier and more pointable than the garand (or m14 for that matter), while still being a similar weight and length. You can change barrels very quickly with no tools, so in theory you could switch from 30-06 to 270 in less than a minute. I would love a modern sporting version of the Johnson
>>
Are JRA BM59s any good, or at least good for a poorfag who wants something with a little punch?
>>
>>53551275
They have a couple different models of BM-59 i believe. But they are all well made, I actually like mine a little more than my m14 especially considering price. If you'd rather have a springfield armory assembled one, they go for about the same price, just harder to find
>>
>>53550611
ayyy ok good to know i will check measurements later. Also can you let me know what a good price is for the gun i got? i tried checking and couldnt come to a good conclusion, i wanna see if i was ripped off or not. I got it for 1400
>>
>>53551953
1400 doesn't seem too crazy of a price, tankers are more uncommon too. The stock on your rifle is a beautiful piece of wood. I'd be happy if i were you.
>>
>>53537088
There is an autism anon which returned a large quantity of american made scars because of lower quality.
>>
>>53551275
Dogshit. But good luck getting a BM59 now that kits are gone, plus a garand receiver now that the CMP is backlogged
>>
>>53552775
>Dogshit
I have not heard this before. What was wrong with yours? Or are you "jez sayin..."?
>>
>>53552161
I am very happy! i just had no frame of reference as to what things cost in that aspect. Tbh i woulda paid more for it, as soon as i saw it i knew i had to have it. funny because i literally asked my friend i work with who visits gunshops almost every day to keep an eye out for one, and a week later he found this. Him and the guys that own the shop were shocked it stayed on the shelf for the few days it took for me to go buy it. Very blessed
>>
>>53550853
>She's a woefully under appreciated battle rifle, especially compared to her contemporaries.
Definitely not under appreciated in terms of price. I'd love to get one to have another .30-06 battle rifle but the $5k+ can get quite a few other things I'm still missing.
>>
>>53551953
>1400
I buy this all day long, you got seveal mags included and a nice stick.
>>
File: 163916391.jpg (79 KB, 750x750)
79 KB
79 KB JPG
>>53545729
Slava Lubeanon
>>
>>53553154
The mags werent included, i got those seperate, but yes it is a very nice stick
>>
File: PXL_20220514_020210474~2.jpg (561 KB, 1944x1883)
561 KB
561 KB JPG
Spicy
>>
I bought a pe57 parts kit and cant find a receiver or barrel wtf Fuck. I found a shitty piece of receiver that I would have to machine and weld the front trunnions on and then get a barrel pressed on i am fucked how do I get this shit for under 1k I already dropped 1k on a parts kit
>>
>>53544830
Does the XM5 count as a battle rifle ?
>>
>>53553466
No needs to be over 556
>>
>>53553489
>5.56
>6.8
>>
>>53553466
Did you read OP?
>>
File: 1645305997611.jpg (221 KB, 1280x958)
221 KB
221 KB JPG
welp, guess i'll be gone from this place and the site for a while. finally got transferred to a better job site and will be working more hours. more hours, more money. more money more BRs and BRs accessories, and i guess i can save some cash for other stuff too. just sharin' cause i got no one to talk to.
/blog
>>
>>53554081
congratulations fren, we'll still be here, post new bee are pics when you get back
>>
>>53554081
congrats anon excited to see your new SCAR
>>
>>53552986
I am aware what they cost. It's only money, you can make more of that. They aren't making more Johnsons
>>
>>53554081
Y'all come back now, ya' hear!
>>
File: 1652495506946.jpg (287 KB, 1049x580)
287 KB
287 KB JPG
Do you need special tools to install furniture on PTR?
>>
>>53544830
Have a bump on me friends
>>
File: 20220511_180751.jpg (3.28 MB, 4160x3120)
3.28 MB
3.28 MB JPG
Love ya /brg/
>>
File: 20220513_163309.jpg (2.19 MB, 4128x2322)
2.19 MB
2.19 MB JPG
Bump for why .308.
>>
File: BrownBRs.jpg (1.73 MB, 2967x2160)
1.73 MB
1.73 MB JPG
>>53555868
I only needed a screwdriver and a rubber mallet.
>>
File: IMG_6015.jpg (2.02 MB, 4032x3024)
2.02 MB
2.02 MB JPG
>>53555868
just your hands
>>
File: 1651463137513.png (284 KB, 584x520)
284 KB
284 KB PNG
Gmornin!
>>53557678
Lewd thumbnail
>>
>>53558936
I though it was under cooked bacon (crispy, crispy please) but probably corned beef.
>>
>>53559716
nah looks like bacon, sosig, and kraut. Mustards even there, that guys prolly german
>>
File: 20210319_123821.jpg (3.45 MB, 2366x3874)
3.45 MB
3.45 MB JPG
>>53559731
I want my bacon like a tongue depressor. Note equivalent L.O.P.
>>
>>53560506
What kind of stock am I looking at?
>>
>>53560506
Did you have rebuild your collapsible stock? After putting mine on I noticed the bolt return velocity was like half of what it was with the full stock.
>>
>>53557678
Put mustard seeds and whole Black pepper inside the Kraut
>>
>>53544830
I'm thinking of getting a builder to make an hk91 clone for autism reasons.
A while back someone mentioned a A3F stick. I'm not sure if it was for mp5s or g3/91s.
Is it truly that much better than the regular a3
>>
>>53553489
6.8x51> 5.56x45
>>
>>53553665
No
>>
>>53558227
Where to get one of these classic looking ar 10 uppers? and stock/grip?
>>
>>53559731
German here.
I really doubt the guy is German, we just don't randomly eat Sauerkraut and sausage, despite the stereotypes.
Also the text on the mustard bottle is in English.
>>
File: Rash.jpg (20 KB, 173x170)
20 KB
20 KB JPG
Lol... As if everyone is your "fren" here...
>>
File: whatcouldabeen.jpg (181 KB, 1200x798)
181 KB
181 KB JPG
>>53561877
Put fresh ground mustard seed on (after) cooked mustard plant derivatives [kale, broccoli, cabbage etc] to reform sulforaphane that was denatured in cooking process. It binds to benzene and gets excreted via kidneys. Effective even in small doses.
Figured you probably have been exposed to benzene more than once with your job and likely cigarette habit.
>>
>>53561877
Correct, im exposed to more shit I would love. As long as its not chronic im in for fun :D
>>
File: Chocolate Gun.jpg (2.14 MB, 3681x977)
2.14 MB
2.14 MB JPG
>>53562339
It's a BRN-10. Brownells stopped making them, I think, though parts pop up for sale occasionally. If you're doing a build, I'd recommend going with a normal AR-10 lower unless you really want the retro look - the squared off BRN-10 lower means it can't take PMAGs.

I also dyed the furniture a little darker on mine.
>>
>>53544830
Anyone have experience with an hk91 flat build? Who have best flats? Who is a good builder who won't buttfuck the build?
And should I go with a 91 style, or MSG-1 style?
>>
>>53562983
Without modifying the pmag*
>>
>>53562983
I have a p80 lower I'm going to build on, so maybe I'll stick to arg style stuff for it and get a brn 10 later, idk.
>>
File: Now this is podracing.jpg (466 KB, 2048x1536)
466 KB
466 KB JPG
>>53563258
Whatever you want to do, m8. The BRN-10 is probably the nicest shooter of all my battle rifles alongside the MAS-49, but it's definitely not a practical build. If you're looking for anything even remotely practical, a more traditional build would probably be better.
>>
File: 20220514_152702.jpg (2.03 MB, 1399x2486)
2.03 MB
2.03 MB JPG
>>53563258
They're rapidly approaching unobtainium
>>
>>53560587
A fixed HK G3 rear stock (PTR91) with an HK A3 overlaid as closely as possible.
>>53560638
Nope, near new/unissued.
>>
>>53562484
I'll be your fren, you lonely, maladjusted, asocial, prickly bastard. Welcome!
>>
File: 20210516_131516.jpg (3.35 MB, 4128x3096)
3.35 MB
3.35 MB JPG
>>
>>53563416
If they start appreciating in value, Brownells will likely do another production run in the future. It's just a DPMS-pattern with a fancy milled receiver set.
>>
Hello battle rifle bros. I want to get a battle rifle. I think an AR10 is the best fit for me, but I also am not rich, I live on corn syrup and enriched white bread. Is PSA AR10 decent?
>>
>>53566574
>Is PSA AR10 decent?
No. They're not DPMS-compatible.
>>
>>53566598
why would I give a shit about that
>>
>>53566930
You're right. PSA is for you.
>>
>>53567209
Based touche' poster.
>>
File: 20220314_204853.jpg (3.87 MB, 4128x2322)
3.87 MB
3.87 MB JPG
>>
>>53568928
What is this and where can i get it?
>>
>>53568949
Repro 20rnd BAR, 6 mag bando, Amazon.
>>
>>53568928
If this had a chest strap it would be super neato
>>
>>53569251
That is a project for you and you seamstress. Over the sholder, it's ok. Post war Belgian pattern, iirc price and availability was right.
>>
File: 20220401_122945.jpg (2.6 MB, 4128x2322)
2.6 MB
2.6 MB JPG
>>53569380
>project for you and you seamstress
Might be easiest as a velcro placard, tho.
>>
>>53544830
I want a .308 rifle that is accurate enough to dabble in long range shooting, has a heavy enough barrel to do that, can accept a can, can accept a scope, can shoot subs or supers accurately, takes readily available magazines, preferably has iron sights, and doesn't cost an arm and a leg. And is actually being sold somewhere.Is there anything at all I can buy?
>>
>>53569623
Various AR10s and SCAR 17. 50-100% of rifle cost should be spent on glass and mount
>>
>>53569623
PTR or AR10.
For a DMR setup on G3s look up what the swedes and norwegians do.
>>
>>53569726
G3 is out, I have short arms and they just don't fit me at all. I've considered an AR10. Also considering a bolt action, for 1/3 the price of a good AR10.
>>
>>53569623
I just want the Mossberg MSR-10 LONGRANGE HUNTER so bad, but can't recommend until then.
>>
>>53569721
>buy scar 17 for 3500
>you should spend 1750 to 3500 on glass
This rule has always been fucking retarded.
>>
What kind of paint (or marker) would be good to use for adding some identification numbers on my PTR’s stock, like pic related?
>>
>>53570627
SCAR glass starts at $1500
>if you're not an ACOGchad
>>
>>53570810
What precludes someone from buying 1200 LPVO or 800 red dot?
>>
>>53570828
Nothing in fact you'll be able to so do it 2 or 3 more times before selling the SCAR for breaking optics.
Red dot limits your range so I didn't consider it.
>>
>>53570185
Do you mean Savage? I want the normal Version
>>
>>53571001
>Mark my 800 red dot as 1500
>It immediately becomes scar proof
Kek
>>
>>53562339
>BRN-10
There's one for sale on Jew broker for 2000 if you want one that badly
https://www.gunbroker.com/item/932776957
>>
Anyone know the quality of J.L.D ptr's?
>>
>>53571008
>Savage
Sorry, my common mistake. I often do that.
>>
>>53571217
They're the goodest.
>>
>>53570744
Acrylic.
>>
Nite, men.
>>
Some of you may remember me asking if my handguard or barrel is bent a while ago. I now am 99.9 % sure it's my handguard, I took a deprimed case and put It in the chamber and looked at the sun. I got perfectly concentric rings of light. Now my next question does a bent handguard even matter? I don't have irons all I have is a magpul afg and bipod on the handguard and a 45 degree red dot on the very back of the handguard right above the barrel nut. I will test the zero of the red dot this weekend next weekend to see if it moved. Does any of this matter?
>>
File: 1a0.png (92 KB, 785x644)
92 KB
92 KB PNG
Night Frens. Pray my hangover isn't too bad tomorrow.
>>
File: löj.jpg (206 KB, 1206x968)
206 KB
206 KB JPG
>>53573077
I pray for your hangover so I get a bangover
>>
File: arV1xA7_700b.jpg (79 KB, 700x994)
79 KB
79 KB JPG
Morning bump
>>
>>53573077
>>53574888
Gmornin
>>53572691
Nonathis matters. But glad you figured it out anon
>>
>>53571035
Thanks Biden!
>>
>>53569020
>Amazon
>>53569380
https://www.amazon.com/dp/B00PHE3BZU/ref=cm_sw_r_awdo_TDMM752X24TFK1T3C3WC
>>
Come back to life. Don't let the uke threads kill you.
>>
Mike put out a video on the Sig spear. Is he shooting 30 round mags?
https://youtu.be/GEf3ZlUkOCg
>>
/k/ is a dumpster fire today.
>>
File: 20210625_060622.jpg (1.87 MB, 3283x1233)
1.87 MB
1.87 MB JPG
>>53581945
True, but your img is pure clarity.
>>
What does /brg/ think of hte modern Browning BAR MK3? Too fuddy for you?
>>
File: new scope.jpg (2.81 MB, 4032x2593)
2.81 MB
2.81 MB JPG
>>53581945
been out all day. Is it more Russian cope? They've had a disastrous week so they're out in full force
>>
>>53582453
How well do those stanag mounts hold zero. I got the same one from sarco, fitted nice and tight, but haven't used it.
>>
>>53582453
Every other thread for the last 3 months has been vatnik this and vatnik that though.
>>
>>53582382
On my list since the roaring 20's.
>>
File: New optics.jpg (325 KB, 2048x1536)
325 KB
325 KB JPG
>>53582707
not sure yet - a million things came up since last month when I got the scope:
>family trip for a week
>working weird shifts at work the next week
>busy with the girlfriend the entire weekend
>caught the roni the next week
>was fine the past week, but was still within 2 weeks of catching the roni and the only ranges near me are indoors

I haven't had the time to go zero it yet. The mount sits pretty tight on there though. It feels tighter than the Galil's dust cover, so if it's good enough for the Galil it should be good enough for the FAL.
>>
>1967 Kaiser-Jeep M715
Currently @$1k, it will go up: https://bringatrailer.com/listing/1967-jeep-jeep-m715/
>>
File: 1612740308083m.jpg (135 KB, 827x1024)
135 KB
135 KB JPG
>>53583275
Cool beans dude, hope all ends well with personal life too.
>>
Chris Bartocci and gang officially on suicide watch now that the world recognizes the superiority of full power cartridges and his entire life's work (shilling for 5.56 and the AR-15) is in shambles.
Everybody knows you need an actual rifle cartridge to do actual killing.
https://www.youtube.com/watch?v=FruM2IwvRq4
>>
>>53583510
Why is barrel so short though
>>
File: lol.jpg (133 KB, 783x670)
133 KB
133 KB JPG
>won a CETME C kit at auction
>won a G3 kit at auction
>mfw I still don't know how I'll actually be able to put them both together because I've never welded before
>>
>>53584010
Just ask a boomer.
>>
>>53584042
B.but boomers are evil and the cause of all the problems in the world.
>>
>>53584010
You cant swing a dead cat around without hitting three welders. Chances are good one of the people you know irl is either a welder or knows someone who is. Get all your prep work done then find someone to tig weld it together. You could probably offer one of the kits as trade for the labor
>>
>>53584010
>>53584042
>>53584915
>>53585331
Ffs, just go to a Mexican muffler shop. A case of Tecate and $4 in key limes and done.
>>
well I've got enough for a scar but before I get one is there any specific AR10 or other similar rifles I should I look at for around the same price or cheaper?

the LMT MARS H 762 caught my attention. thoughts?
>>
>>53585558
HK gets mentioned.
>>
>>53585890
Those are certainly cool but a little heavier and more expensive.
>>
File: PXL_20220412_020125723-01.jpg (1.56 MB, 2562x1443)
1.56 MB
1.56 MB JPG
>>53582105
This rifle has big "brotha from anotha motha" energy
>>53582453
More domestic events, though the vatnik butthurt remains strong.
>>
File: PXL_20220515_152017598.jpg (3.03 MB, 3072x4080)
3.03 MB
3.03 MB JPG
>>53547795
Finally shot it today boys! It fired beautifully! Only had a few hiccups. First, one od my mags was kinda jank and qould not feed rounds sometimes. Second, a box of ammo a guy sold me had duds. But when i used good rounds and a good mag, it fired SOLID. didnt even have to sight it in it was super accurate. Orange spots are the grouping from 100 yards with the iron sights from a standing position, braced against shoulder. Will post slomo vid of firing soon
>>
>>53586255
Based spaghetti chad and pixel user
>>
File: 4 shooting positions.jpg (123 KB, 1208x746)
123 KB
123 KB JPG
>>53586255
>standing position, braced against shoulder
Is there another standing? Still, good shooting for first time out with a new rifle!
>>
I have a fucking honest question. Why do people here even bother with anything other than a ar 10. Other than collecting faggotry.
>>
>>53582382
Breddy good
>>53582453
Didn't look but we're on pg 10
>>
>>53586509
because life isn't a video game
>>
File: yeah.jpg (68 KB, 500x348)
68 KB
68 KB JPG
>>53586509
Sovl
>>53586587
Were*
>>
>>53586675
>sovl
Really senpai I said other than collecting faggotry. If I were to put wood on a ar you would call that sovl
>>
>>53586636
Uhm that's definitely a observation? Your point?
>>
File: slomo2.webm (2.92 MB, 1920x1080)
2.92 MB
2.92 MB WEBM
>>53586337
True lmao
>>53586282
B)
>>53586255
>>53547795
heres a slomo as promised :)
>>
>>53586509
Because the midwit take is thinking guns should only be tools for shooting gime sized groups at 600yd. True high intellect cognoscenti know that guns are fucking fun and there's just as much value in shooting at washing machines in the desert with a beeg boolit.
>>53586838
Absolute kino
>>
>>53586880
I'd say a ar 10 Is more fun than a dog shit gun that has a break in period and requires welding to fix it every 1000 rounds. Or a 13 pd 100 yr old 4 moa piece of shit. Wouldn't it be more fun to have a gun that works right out of the box, and doesn't require a heart transplant just to mount a fucking scope?
>>
>>53586825
>hur dur why aren't you faggots min maxing like muh cowadootys?
inb4 who am I quoting - I am quoting you.
>>
>>53586944
>Wouldn't it be more fun to have a gun that works right out of the box, and doesn't require a heart transplant just to mount a fucking scope?
No.
>>
>>53586956
Senpai what are u even saying.
>>
>>53586971
Cool. I'll sell u my car without the engine. That parts on you
>>
File: 20201002_074839.jpg (1.83 MB, 1138x3711)
1.83 MB
1.83 MB JPG
>>53586838
I am so enamored with your mutation Garand! Very excited for you, you really scored a winner!
>>
File: 1629853366147.jpg (13 KB, 280x373)
13 KB
13 KB JPG
>>53586944
From the way you talk you don't shoot enough. Guns are generally reliable. PTRs, FALs, and M14s all are roughly the same in terms of reliability and durability; they don't spontaneously combust because they aren't ARs. Sure there can be quality issues, see post-COVID PTR, dodgy FAL kit builds, and Springfield M1As, but AR-10s can suffer from the same issues. Obviously an AR-10 will be better for certain tasks, especially those that demand supreme accuracy, but not everyone's idea of "fun" is shooting one round a minute from a bench.

In short, just learn that you dislike certain guns that others find quite enjoyable, and let everyone live their lives without being a dickhead.
>>
>>53587002
No.
>>
>>53586880
Avery?
>>
>>53587049
>From the way you talk you don't shoot enough. Guns are generally reliable. PTRs, FALs, and M14s all are roughly the same in terms of reliability and durability
Not him but we all know that's not true, brother.
>>
>>53587075
Well, yes, but I was trying to make a point. Still love you, M14tards.
>>
>>53587049
I just can't wrap my fucking head around this shit. You guys choose outdated unreliable pieces of shit. Constantly recommend others get these guns as well. Like the m14 manufacturers made faulty ammo for the m16 and got Americans killed. The m1a is such a fucking meme. The ptr is pure ass. Can we just move on. These guns had their time. It's over.
>>
>>53586880
>>53587043
Thanks! Heres a longer vid with real time, slomo, and sound!

https://emalm.com/?v=q2REA
>>
>>53587066
I have no idea who that is
>>53587118
Yes, all 90 of those nations that adopted the FAL did it for the meme. Those nations that still use the G3 to this day do it to dab on AR-10 owners like yourself. They do it all anon, just to piss you off. Even countries that choose to use AKs are all doing it wrong... nobody has ever killed anyone with an AK. Ever.

Pull your head out of your ass please.
>>
>>53587049
You might like USOG on YouTube. Lowkey, real reviews. Canadian, but still...
>>
>>53587139
Nice. But may I suggest you work on your form? Looking loose.
>>
>>53587223
I was going to suggest this to him but I think he might be trying to leave the action unobstructed for the camera by hip firing.
>>
>>53587172
I'm pretty sure everyone here is American. We have better options then all of that shit. And I'm talking about modern day, not the fucking 90s. The ar 10 is better in every way imaginable. Yet you guys still old shit just because it has wood furniture and sovl. You call me irrational and a jackass, but your choosing shit tools for the job. Whether that job be fun or work
>>
>>53587264
Okay guy.
>>
>>53587255
>>53587223
yeah i wasnt aiming i was just firing fast to get good footage
>>
>>53587264
>I'm pretty sure everyone here is American
Neger, bitte. You should know better than that.
>>
File: 20200418_151634.jpg (2.26 MB, 4128x2322)
2.26 MB
2.26 MB JPG
>>53587264
>wood furniture
My fiberglass would like a word with you. Lol, next he'll say molle is better than ALICE or the world isn't flat! I think he's gone bananas.
>>
>>53587283
I'm just saying. That's why this thread dies and none of the other generals do. Your all just boomers who collect and thats it. If I stopped bumping this thread at 3 in the morning it would even exist.
>>
>>53587324
Germany. Ok anon... do u have insurance for that knoife?
>>
>>53544830
anyone here messed with HK's 308 rifle at all?
>>
>>53587460
Hk 308 rifle
>124 results
Specifics nigger
>>
>>53587350
You are welcome to go back to /arg/ then.
>>
>>53587441
I'm not british lmao
>>
>>53587528
I'm actually don't even go their. I honestly browse gq the most. And then just look for non ukie threads. Then /diy/
>>
>>53587555
>honestly browse gq the most.
>Clyde, get in here!
https://youtu.be/5yU9bcrbvs0
>>
>>53587507
apologies, i forgot about the old HK line.

i am talking about the MR762 AR rifle they have
>>
>>53587706
Hard to believe it was only 4 years ago that we were still getting decent stuff like that. RIP.
https://youtu.be/Cuh3unwYMzw
>>
>>53587813
They're fine rifles. There's others that can do the same shit and cost less, and in some cases weigh less as well.
But if you think it's cool and are okay with spending that much go ahead.
>>
File: IMG_7962.jpg (2.89 MB, 4032x3024)
2.89 MB
2.89 MB JPG
FN FNAR Heavy. 20" chf barrel. 20 rd mags.
>>
>>53587555
Clever girl.
>>
File: IMG_7964.jpg (2.61 MB, 4032x3024)
2.61 MB
2.61 MB JPG
>>53588076
>>
>>53587987
do you have any recommendations? the HK series has plenty of style points in my book
>>
File: IMG_7965.jpg (2.57 MB, 4032x3024)
2.57 MB
2.57 MB JPG
>>53588076
>>53588094

What we're looking at here is a basic commercial Browning BAR upgraded to the point of being a new product.

FN looked at making something similar in the mid-sixties while developing the hunting BAR but didn't produce it.

This thing was poorly marketed, but is a decent all-around SHTF 7.62 rifle.
>>
>>53588113
>style points
Go get a skeletonized 10.3 inch ar 15 then. Make it rainbow colored
>>
>>53588212
>bulky imposing modern HK rifle
>skeletonized rainbow AR

not exactly the same thing, but i appreciate your attempt at brevity anon
>>
>>53588113

A SIG 716 dmr variant is pretty hot shit.

Wilson Combat is good.

DD....eh. Good barrels but budget furniture.
>>
>>53588323
oooo that sig looks promising, thanks for the recommendations anon!
>>
>>53588297
I'm just saying. You can make any gun stylish. Just get a ar 10 with a a2 stock and quad rails. It will be a thicc boi
>>
>>53586817
Yah
>>
File: IMG_0694.jpg (341 KB, 2549x1063)
341 KB
341 KB JPG
>>53588365

You're going to get 98% of the performance at like 60% of the cost of one of those HKs. I get it -they're sweet, but unless it's a safe gun get something you won't hate yourself for using.
>>
>>53588476
incidentally i am haphazardly in the market for a friend, worried about the future and want to make sure he has a proper rifle "just in case" i actually own a Scar personally but i know there are other options out there, thanks again anon!

>>53588464
but i would know anon, and thats a weight even i cant bear
>>
>>53588133
Checked and based. I like it.
>>
Range day with the bros. Put a new compensator on my 716, it's like firing a whole new gun. Not quite the same recoil as an m4 but it's not far off.
>>
File: 20220515_223355.jpg (1.29 MB, 4800x1413)
1.29 MB
1.29 MB JPG
Hey /brg/ I finally got my zastava pap m77 back from my buddy after regretfully selling it a few years back.
I'd like to put a scope on it but honestly have no idea what would fit anyone have some suggestions? I already removed and replaced the shitty thumbhole stock/grip and am gonna get some CSSpec mags for itm
>>
>>53587555
>honestly browse gq the most
Didn't they just catch this AR monkey in NY? Did he make bail already?
>>
>>53587813
>old HK line.
Yes, I still want an SL7.
>>
>>53588652
Idk senpai. No one even knew who he was. He probably didn't talk in gq, just lurk.
>>
>>53588076
>>53588094
>>53588133
>Browning BAR upgraded
Always underrated imo. Updated by JMB grandson, so so it goes.
>>
>>53588297
>brevity
I think you mean levity. The absolute state of American education.
>>
>>53588133
Does anyone make better furniture for it.
>>
>>53588113
SCAR
>>
>>53588961
OK. JMB designed the military BAR.

Grandson Bruce, son of Val, worked with FN to create the commercial BAR - sort of an upper crust autoloading hunting rifle - in the Sixties.

The FN FNAR is basically a reinforced/heavily modified/upgraded commercial BAR designed for/stress tested to 10K+ rounds.
>>
>>53588980

There's a Finnish(?) company that makes some AR-style stocks.

It comes with 3 different cheek comb inserts, and several stock shims - it's adaptable as hell and the AR-style grip actually works.

It's front-heavy, though. Good and bad.
>>
>>53588980
>>53589080
>>
>>53588980
I believe it takes Safari MKII furniture.
>>
File: clunko.jpg (1.72 MB, 3039x1908)
1.72 MB
1.72 MB JPG
>>53589080
>>53589167
I suddenly feel like it doesn't look as strange with an optic on it. Like it's just "completed."
>>
File: m77.jpg (2.56 MB, 3840x2160)
2.56 MB
2.56 MB JPG
>>53588637
I put a Vortex Crossfire II 3-9x40 on mine, and it looks and feels very nice. Also, welcome to the club. It's good to see some AK bros in here to break up all the AR/PTR/FAL posting in here
>>
>>53561877
I want to get some of the new lube when it comes out but don’t want to go on this site, is there a mailing list? Do you accept beta testers? I shoot a lot
>>
>>53587350
>If I stopped bumping this thread at 3 in the morning it would even exist.
We owe it all to you.
>>
>>53545137
>12 Romy bayonets

Are they the stinky ones with only a scabbard?
>>
>>53587555
Checked, but on a serious note, find me a good AR-10 with excellent durability for $1500 or under and I'll buy it immediately. I'm not even kidding. The only reason I picked up a damn PTR 91 is because I couldn't find an AR-10 in 2021 for a good price (but a $1200 PTR brand new was an easy choice).

I want my PTR91 and AR-10 chad combo, but I can't find a non-shit AR-10.
>>
2016-2017 manufactured Ptr-91 did great at the range this weekend. Claw mount, Burris rt6, mapgul PRS stock, wide handguard+ steel bipod, and Bill Springfield match trigger. With steel wolf ammo my best group was 3 inches at 200 yards. All the boomers came over and asked me about it because I was ringing the steel like I was shaking a bell at max range and they were impressed. A+ rifle and any of you new fags reading this should strongly consider getting one.
>>
>>53593178
Theirs like 2 on this website.
https://www.guns.com/firearms/ar-10-rifles
Dear God man I bought my dpms in 2018 for 800$ wtf
>>
>>53593473
Not him but
>there's like 2
Lmao.
>>
>>53593473
Thanks anon. Hopefully if you stick around long enough you'll get to see my PTR91 and AR-10 combo. I would get a SCAR 17 if they didn't cost an arm and a leg, but honestly I think a really good AR-10 can give a SCAR 17 a run for its' money.
>>
>>53593351
>Bill Springfield match trigger
I will often regret missing out on this and do.
>>
>>53593178
Done: https://www.guns.com/firearms/rifles/semi-auto/savage-arms-msr-10-hunter-overwatch-6-5-creedmoor-20-1-rounds-18-0-barrel-new?p=461321
>>
File: 20220130_093032.jpg (3.58 MB, 4000x3000)
3.58 MB
3.58 MB JPG
>>53593625
I lurk here I just don't really post. This is a old pic of my dpms oracle.
>>
>>53593683
Nice. Always welcome to post, fren.
>>
>>53588602
Neat looks fun
>>53588637
Lesson learned: never sell
>>53589899
Look good m8
>>
>>53593785
>Lesson learned: never sell
Literally every single time we see these posts it is always along the line of "I regret selling"
>>
>>53593852
>I regret selling
More than that: >>53593656
>>
>>53589926
Nice to see someone with another M77 they don't seem to common!
What scope mount did you use?
>>
>>53593785
I found the 716 controllable before but now it's so easy to shoot with such a light recoil impulse I wonder why sig doesn't sell it already attached. Its a sig Sauer 716 tread with the tread compensator
>>
>>53593683
I don't even really care for anime (except Initial D and Ghost In The Shell, but I think those are good shows that happen to be anime), but damn son that's a nice patch collection and a beautiful gun to boot.
>>
>>53593178
>non-shit AR-10 for under 1500
Doesn’t exist. The cheapest you could’ve gone was when LMT was clearing out their old LM8 uppers and played the barrel game.
>>
>>53594780
>Ghost In The Shell
Why couldn't I get through the first retarded 12 minutes of this after all the /k/hype?
>t. Love Death & Robots is pretty goot
>>
>>53594812
I got my sig Sauer 716 for just under that actually. The Smith and Wesson m&p sport 10 is also allegedly decent, and it's only like 1100, which leaves you a decent amount of room for an optic. AR-10s now are probably the most practical and reliable battle rifle you can get.
>>
File: 36b.png (605 KB, 640x905)
605 KB
605 KB PNG
>>53594816
Are you talking about the movie with Scarlett Johanson or whatever her name is? If so, fuck that movie. But if you're talking about the 1st season of the Ghost In The Shell show, then the 1st episode is only alright, but it has no major storyline except for explaining the roles of Section 9 very quickly during a fast operation. The story doesn't kick in until you hear about "The Laughing Man". Honestly, half the episodes are just about the backstories of the characters during Season 1 (episode 1 is one of them), but there are only like 7 or 8 major episodes that contain "The Laughing Man", which is definitely the point of Season 1 and is meant to talk about how corporate vs. corporate sabotage and a rapidly changing stock price leads to companies making rash decisions that, inevitably, only ends up affecting and hurting the commonfolk in the crossfire. Don't worry, there's a lot more that I didn't spoil for you in case you wanted to watch it sometime.

And for what it's worth: Season 1 > Season 2. But Season 2 is really good too.
>>
>>53594941
Oh, and pic not related. I just wanted to post my favorite anime girl with a G3. I don't care for much anime anymore, but I'm sure when my baby son grows up he will pull me back into it (since I was huge into it during middle school but faded a bit in high school).
>>
>>53594941
>talking about the movie
No. Anime, some kind of chase scene that starts out ok and 10min in turns into 7yos playing out the movie with matchbox car tier story line. I did like the live action Cowboy Bebop.
>>
>>53594508
I use the Zastava USA mount. I don't think it's the lightest mount out there, but it's well made and I think it's the best looking
>>
>>53593672
>Creedmoor
>Battle Rifle
>>
File: Holohunk.jpg (546 KB, 1292x1082)
546 KB
546 KB JPG
>>53593785
Sadly that aimpoint shit the bed when the battery compartment got fucked up, made me sad. Now I use a fat eokek.
>>53592801
Sure? some of them didn't come with scabbards but they're all still AFFIX BAYONETS capable. I got them for $5 each so no big deal. Flipping them for $30 each during a vending event at a microbrewery.

Now I have to ask, I know LPKs for an AR-10 shouldn't be mixed, but are triggers okay? I want to use an Armalite 10a upper-lower but would like to use a geissele trigger or something. All armalite has for good trigs is a 2 stage.
>>
>>53594816
>t. Love Death & Robots is pretty goot
Not to worry man, you just have extremely bad tastes
>>
>>53597788
Thanks Anon. I wasn't sure which mounts would fit. Not to worried about weight since this rifle is a pig anyways. Definitely a good looking mount.
Did you modify M14 mags or get the csspec ones?
>>
>>53593656
>>53594345
Does he not make them anymore?
>>
>>53598141
It's 308 improved therefore, battle rifle.
>>53598267
C H O N K
>>
Robert rtg has wide handguards in stock
>>
File: IMG20220516181604.jpg (575 KB, 1742x741)
575 KB
575 KB JPG
acquired a chinese replica bipod. Supposedly these are better than the originals, and it certainly feels really solid. Made of decently thick sheet steel and machined parts for the joints.
>>
>>53596180
>I did like the live action Cowboy Bebop.
>>
>>53586509
I have personal preferences against things like collapsing stocks, more vertical grips, and the rear position of the charging handle and towards things like folding stocks, more horizontal grips, and left side charging handles.
So I chose an FAL over an AR10. I can get a 1.5" group at 100m with good ammo and that's plenty great for me.
>muh modularity
I am getting the DSArms m-lok handguard and scope mount soon.
>>
>>53599396
His shop burned 1yr ago?
>>
>>53598943
It's cool, I'm used to it. I like Dark Mirror, too.
>>
File: NNprayer4frens.png (563 KB, 748x727)
563 KB
563 KB PNG
Evenin frena. Fuck Ukraine and fuck Russia, that is all.
>>
File: Heavy Boi.jpg (1.63 MB, 4032x1664)
1.63 MB
1.63 MB JPG
>>53604312
I won't be content until there's a zinc coffin and grieving family in a dilapidated Khrushchyovka for every single shitpost I've experienced here in the last 8 years.
>>
>>53604402
Is there enough zinc on earth for that?
>>
Evening, have a bump with a definitely a battle rifle
>>
>>53605552
Pedersen device?
>>
File: 20220516_205818.jpg (1.68 MB, 4000x3000)
1.68 MB
1.68 MB JPG
This little fella on the opposite side of the front sight's windage adjustment knob spins back and forth about 100 degrees with my fingers.
Is this normal or is something fucky?
SCAR 17
>>
>>53604463
250 million tons world reserve. More mineable.
>>
>>53600055
Thanks for the heads up, Robby.
>>
>>53606570
That's a lot of shitposting.
>>
>>53544830
that is a very handsome frog
>>
File: 20220516_193204.jpg (1007 KB, 1504x3584)
1007 KB
1007 KB JPG
>>53606185
Bumping.
Lads I need you.
>>
Summer is almost upon us.
>>
>>53609939
Based "behind the door gun safe" poster beat my bump.
>>
>>53553456
Nigga you bought a pe57 kit , you're gonna have to pay out the ass
>>
>>53609947
I've been here since my first summer when I was 11 or 12 and it's been almost 2 decades, and just like any group activity with any popularity you gotta sift through a ton of shit people to get people who like it enough to stick around and contribute something useful. I just hope for more lurkers than shitposters.
>>
>>53609947
Trying desperately to get faggots to the range.
>>
>>53605721
Lee enfield
>>
>>53599268
I went with csspecs mags, which have worked flawlessly so far, both the 20 and 25 round magazine.
>>
What's in your bottom hole?
A big snake, broken shell extractor, and grape drank.
>>
>>53545089
I had to go way back to find thread numbers. 308 soon
>>
File: IMG_20220101_225442_708.jpg (331 KB, 720x1280)
331 KB
331 KB JPG
I have an ar10 polymer lower that I got for free. It has a broken bolt catch, but otherwise it looks good. What am I looking at price wise to put together a beater AR10?
>>
>>53613878
like 1400, the lower is one of the cheapest parts
>>
File: 5g.gif (1.23 MB, 251x300)
1.23 MB
1.23 MB GIF
>>53585360
lowkey. this
>>
>>53545054
Yea
>>
>>53600055
Hell yeah
>>
>>53588961
> h c a r
>>
>>53544830
Do soviet brg exist?
>>
File: 20220226_185742.jpg (3.89 MB, 4128x2322)
3.89 MB
3.89 MB JPG
>>53616126
>>
>>53616210
AK.
>>
>>53615758
Make sure you buy the right size, because the short one and the full size one are both in stock
>>
File: 1558577313874.gif (2.78 MB, 260x245)
2.78 MB
2.78 MB GIF
>>53596180
>I did like the live action Cowboy Bebop.
>>
>>53616210

Saiga .308's
>>
File: autonuggetchan.jpg (2.47 MB, 3840x2160)
2.47 MB
2.47 MB JPG
>>53616210
I'm so glad you asked, anon
>>
remind me again
cab you load g3 with a clip ?
>>
>>53620092
With $6.99 magazines why would you want to?
>>
>>53620406
Meh, 60 rnds in mags is way bulkier than 60 rnds on strippers.
>>
>>53620769
>>53620406
>>53620092
>1 pound of steel is heavier than 1 pound of feathers
Vobes
>>
>>53621238
>bulk==volume
This is easy.
>>
File: 1646776133646m.jpg (132 KB, 819x1024)
132 KB
132 KB JPG
>>53616210
Yes, the AVS-36, SVT-38, SVT-40, and SVD all count as battle rifles. I secretly hope some SVD-Ms find their way here into the US after the current conflict is over.
>>
>>53620769
You shouldn't be bulk storing ammo in mags anyway fren. If you want less bulky ammo you should go back to intermediate cartridges
>>
>>53621529
Are you sure you're connecting the dots in the right order?
>>
File: T48 clip loading.webm (2.74 MB, 664x476)
2.74 MB
2.74 MB WEBM
>>53620092
While the mag is in the rifle? AFAIK no. Only M14 chads and some FAL chads can do this.

While the mag is out of the rifle? Again AFAIK no, not with original equipment. This prooonter guy does sell 3D printed adapters however. https://cogburnarsenal.com/product/hk91-g3-or-cetme-stripper-clip-mag-loader/
>>
>>53621347
Are there 30 round stripper clips?
Don't they usually come in 5s or 10s?
Sounds annoying.
>>
>>53621719
Given that reloading a detachable magazine fed rifle with stripper clips is pants on head retarded i would say so. They are great for storage though, especially if you can load empty mags without them being in the gun
>>
>>53622040
>annoying
>>53622092
>retarded
Some rifles have stripper guides built in. This is the type to reload before empty. Or in tge case of the SkS, UPON empty. If not built in guides, a "spoon" or other stripper guide is still faster than single loading bullets, even with practice. And I do both. There are mag loading assists of many types. Got some gibs from Lucky himself (Lucky's Loaders) some better than others. Butler Creek 10/22 mag loaders work ...ok... still faster than single loading. And some mag loaders are just plain gimmicks. In the end, raise your kids with mag loading contests at family picnics is my best advice, if you don't want the red pill on strippers.
>>
>>53622038
Also FN-49, MAS-46, AVS-36, G41,, and I think SVT and G43 but I'm not sure on those.
>>
CMP sent me my upgrade email to try to get me to swap my field grade M1 order for a service. Hype. I don't think I'm going to do it, just excited that I'm a step closer to having an M1. I am debating the upgrade though. $100 for being sure of a walnut stock, but less likely to be a GI stock. But potentially better bore/less rust. Idk.
>>
>>53622435
Get the BEST rifle you can (almost) afford. Give up a sin to budget the extra.
>>
File: 20210705_201641.jpg (185 KB, 810x1080)
185 KB
185 KB JPG
>>53622418
Hakim too. Based Egyptian finger-chopper.
>>
>>53622478
I've got the money, the question is whether service grade is actually better in my eyes. I want a shooter with some history, that I won't be afraid to use. I don't know that answer.
>>
>>53622418
Mea culpa, I was thinking of the NATO clips
>>
Ah, bump limit achieved.
>>
File: 1624846596331.jpg (626 KB, 945x1323)
626 KB
626 KB JPG
Booba
God, I need an M14.
>>
File: 1651025915328.jpg (103 KB, 1024x1024)
103 KB
103 KB JPG
>>53623181
Boobers
>>
File: 20220518_005206_963.jpg (346 KB, 774x1210)
346 KB
346 KB JPG
Time check
>>
File: 20220518_005211_940.jpg (160 KB, 683x1024)
160 KB
160 KB JPG
>>53623181
Yes
>>
File: m14look.png.jpg (525 KB, 828x1326)
525 KB
525 KB JPG
>>53623181
I'm going to buy one soon because of her.
>>
File: 20220518_015047_477.jpg (414 KB, 685x1000)
414 KB
414 KB JPG
NN
>make a new thread
>>
>>53620406
I just like it lol
>>53622038
thaks
>>
>>53624382
It's already up >>53623640



Delete Post: [File Only] Style:
[Disable Mobile View / Use Desktop Site]

[Enable Mobile View / Use Mobile Site]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.